Maxim MAX20335 Regulator 바인딩

:orphan:

.. raw:: html

    <!--
    FIXME: do not limit page width until content uses another representation
    format other than tables
    -->
    <style>.wy-nav-content { max-width: none; !important }</style>

.. dtcompatible:: maxim,max20335-regulator
.. _dtbinding_maxim_max20335_regulator:

maxim,max20335-regulator
########################

Vendor: :ref:`Maxim Integrated Products <dt_vendor_maxim>`

Description
***********



.. code-block:: none

   Maxim MAX20335 PMIC

   The PMIC has two buck converters and three LDOs. All need to be defined as
   children nodes, strictly following the BUCK1..2, LDO1..3 node names. For
   example:

   pmic@28 {
     reg = <0x28>;
     ...
     regulators {
       compatible = maxim,max20335-regulator";

       BUCK1 {
         /* all properties for BUCK1 */
       };
       BUCK2 {
         /* all properties for BUCK2 */
       };
       LDO1 {
         /* all properties for LDO1 */
       };
       LDO2 {
         /* all properties for LDO2 */
       };
       LDO3 {
         /* all properties for LDO3 */
       };
     };
   };

Properties
**********

Top level properties
====================


These property descriptions apply to "maxim,max20335-regulator"
nodes themselves. This page also describes child node
properties in the following sections.

.. tabs::

   .. group-tab:: Node specific properties

      Properties not inherited from the base binding file.

      (None)

   .. group-tab:: Deprecated node specific properties

      Deprecated properties not inherited from the base binding file.

      (None)

   .. group-tab:: Base properties

      Properties inherited from the base binding file, which defines
      common properties that may be set on many nodes. Not all of these
      may apply to the "maxim,max20335-regulator" compatible.

      .. list-table::
         :widths: 1 1 4
         :header-rows: 1

         * - Name
           - Type
           - Details

         * - ``wakeup-source``
           - ``boolean``
           - .. code-block:: none

                Property to identify that a device can be used as wake up source.

                When this property is provided a specific flag is set into the
                device that tells the system that the device is capable of
                wake up the system.

                Wake up capable devices are disabled (interruptions will not wake up
                the system) by default but they can be enabled at runtime if necessary.



         * - ``power-domain``
           - ``phandle``
           - .. code-block:: none


                Power domain the device belongs to.

                The device will be notified when the power domain it belongs to is either
                suspended or resumed.



         * - ``zephyr,pm-device-runtime-auto``
           - ``boolean``
           - .. code-block:: none

                Automatically configure the device for runtime power management after the
                init function runs.



         * - ``zephyr,disabling-power-states``
           - ``phandles``
           - .. code-block:: none

                List of power states that will disable this device power.



         * - ``status``
           - ``string``
           - .. code-block:: none

                indicates the operational status of a device


             Legal values: ``'ok'``, ``'okay'``, ``'disabled'``, ``'reserved'``, ``'fail'``, ``'fail-sss'``

             See :ref:`dt-important-props` for more information.

         * - ``compatible``
           - ``string-array``
           - .. code-block:: none

                compatible strings


             This property is **required**.

             See :ref:`dt-important-props` for more information.

         * - ``reg``
           - ``array``
           - .. code-block:: none

                register space


             See :ref:`dt-important-props` for more information.

         * - ``reg-names``
           - ``string-array``
           - .. code-block:: none

                name of each register space


         * - ``interrupts``
           - ``array``
           - .. code-block:: none

                interrupts for device


             See :ref:`dt-important-props` for more information.

         * - ``interrupts-extended``
           - ``compound``
           - .. code-block:: none

                extended interrupt specifier for device


         * - ``interrupt-names``
           - ``string-array``
           - .. code-block:: none

                name of each interrupt


         * - ``interrupt-parent``
           - ``phandle``
           - .. code-block:: none

                phandle to interrupt controller node


         * - ``label``
           - ``string``
           - .. code-block:: none

                Human readable string describing the device (used as device_get_binding() argument)



             See :ref:`dt-important-props` for more information.

             This property is **deprecated**.

         * - ``clocks``
           - ``phandle-array``
           - .. code-block:: none

                Clock gate information


         * - ``clock-names``
           - ``string-array``
           - .. code-block:: none

                name of each clock


         * - ``#address-cells``
           - ``int``
           - .. code-block:: none

                number of address cells in reg property


         * - ``#size-cells``
           - ``int``
           - .. code-block:: none

                number of size cells in reg property


         * - ``dmas``
           - ``phandle-array``
           - .. code-block:: none

                DMA channels specifiers


         * - ``dma-names``
           - ``string-array``
           - .. code-block:: none

                Provided names of DMA channel specifiers


         * - ``io-channels``
           - ``phandle-array``
           - .. code-block:: none

                IO channels specifiers


         * - ``io-channel-names``
           - ``string-array``
           - .. code-block:: none

                Provided names of IO channel specifiers


         * - ``mboxes``
           - ``phandle-array``
           - .. code-block:: none

                mailbox / IPM channels specifiers


         * - ``mbox-names``
           - ``string-array``
           - .. code-block:: none

                Provided names of mailbox / IPM channel specifiers


         * - ``zephyr,deferred-init``
           - ``boolean``
           - .. code-block:: none

                Do not initialize device automatically on boot. Device should be manually
                initialized using device_init().






Child node properties
=====================

.. list-table::
   :widths: 1 1 4
   :header-rows: 1

   * - Name
     - Type
     - Details

   * - ``regulator-init-microvolt``
     - ``int``
     - .. code-block:: none

          Voltage set during initialisation


   * - ``regulator-min-microvolt``
     - ``int``
     - .. code-block:: none

          smallest voltage consumers may set


   * - ``regulator-max-microvolt``
     - ``int``
     - .. code-block:: none

          largest voltage consumers may set


   * - ``regulator-init-microamp``
     - ``int``
     - .. code-block:: none

          Current set during initialisation


   * - ``regulator-max-microamp``
     - ``int``
     - .. code-block:: none

          largest current consumers may set


   * - ``regulator-always-on``
     - ``boolean``
     - .. code-block:: none

          boolean, regulator should never be disabled


   * - ``regulator-boot-on``
     - ``boolean``
     - .. code-block:: none

          bootloader/firmware enabled regulator.
          It's expected that this regulator was left on by the bootloader.
          If the bootloader didn't leave it on then OS should turn it on
          at boot but shouldn't prevent it from being turned off later.
          This property is intended to only be used for regulators where
          software cannot read the state of the regulator.



   * - ``regulator-initial-mode``
     - ``int``
     - .. code-block:: none

          Initial operating mode. The set of possible operating modes depends on the
          capabilities of every hardware so each device binding documentation
          explains which values the regulator supports.



   * - ``regulator-allowed-modes``
     - ``array``
     - .. code-block:: none

          List of operating modes that software is allowed to configure for the
          regulator at run-time. Elements may be specified in any order. The set of
          possible operating modes depends on the capabilities of every hardware so
          each device binding document explains which values the regulator supports.