boards/st/stm32g0316_disco/doc/index.html · boards/st/stm32g0316_disco/doc/index.rst 공식 원문 ↗

Zephyr 3.7.0 · Boards · ST · SO8

ST STM32G0316 Discovery

SO8-to-DIL8 module의 shared die I/O와 충돌 방지 조건을 설명합니다.

Official pathboards/st/stm32g0316_disco/doc/index.html
Source fileboards/st/stm32g0316_disco/doc/index.rst
Source versionZephyr 3.7.0
TranslationFull · reviewed

본문 기준: Zephyr 3.7.0 LTS3 · 이후 유지보수 패치는 별도입니다.

Part 1

요약·해설

지원표 6행, 3개 pin mapping, DIL8 hardware와 ST-LINK flash/debug 절을 전문 번역했습니다.

MCU

STM32G031J6

Core

Cortex-M0+

Memory

32KB / 8KB

Module

SO8 → DIL8

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기
원문 SHA-256 C29DD25FB3D31F2E19E8AA63F1D00FC7DA1DF8361BE3C04BD65B85CE32706A6C
.. _stm32g0316_disco_board:

ST STM32G0316 Discovery
#######################

Overview
********

The STM32G0316-DISCO Discovery kit helps to discover features of STM32G0 in SO8 package.
This discovery kit offers an SO8 to DIL8 module designed with the STM32G031J6 microcontroller
and allows the user to develop applications. It includes an on-board ST-LINK/V2-1 to debug
and program the embedded STM32 microcontroller.

.. image:: ../../../../../../../boards/st/stm32g0316_disco/doc/img/stm32g0316_disco.jpg
   :align: center
   :alt: STM32G0316-DISCO

Hardware
********

- STM32G031J6 Arm |reg| Cortex |reg|-M0+ core-based microcontroller,
  featuring 32 Kbytes of Flash memory and 8 Kbytes of SRAM, in an SO8 package
- 1 user LED
- 1 reset/user push-button
- Individual and breakable STM32 SO8 to DIL8 module
- ST-LINK Micro-B USB connector
- DIL8 socket to ease programming of the STM32 MCU
- On-board ST-LINK/V2-1 debugger/programmer

For more information about the STM32G03x SoC and the STM32G0316-DISCO board, see these ST reference documents:

- `STM32G031J6 website`_
- `STM32G031 datasheet`_
- `STM32G0x1 reference manual`_
- `STM32G0316-DISCO website`_

Supported Features
==================

The Zephyr stm32g0316_disco board configuration supports the following hardware features:

+-----------+------------+-------------------------------------+
| Interface | Controller | Driver/Component                    |
+===========+============+=====================================+
| NVIC      | on-chip    | nested vector interrupt controller  |
+-----------+------------+-------------------------------------+
| UART      | on-chip    | serial port-polling;                |
|           |            | serial port-interrupt               |
+-----------+------------+-------------------------------------+
| PINMUX    | on-chip    | pinmux                              |
+-----------+------------+-------------------------------------+
| GPIO      | on-chip    | gpio                                |
+-----------+------------+-------------------------------------+
| CLOCK     | on-chip    | reset and clock control             |
+-----------+------------+-------------------------------------+
| WATCHDOG  | on-chip    | independent watchdog                |
+-----------+------------+-------------------------------------+

Other hardware features are not currently supported by the port.

The default configuration can be found in the defconfig file:
:zephyr_file:`boards/st/stm32g0316_disco/stm32g0316_disco_defconfig`

Connections and IOs
===================

Due to the small number of I/O pins on the SO8 package, multiple die I/Os are bonded
to the same package pins to maximize the number of peripherals which can be used.
Care must be taken not to set two I/Os which are connected together to conflicting
states (e.g. both as outputs, one low, the other high).

Default Zephyr Peripheral Mapping:
----------------------------------

.. rst-class:: rst-columns

- UART_1 TX/RX : PA9/PB7 (pins 5/1)
- USER_PB : PA0 (pin 4)
- LD2 : PA12 (pin 6)

Programming and Debugging
*************************

Applications for the ``stm32g0316_disco`` board configuration can be built the
usual way (see :ref:`build_an_application` and :ref:`application_run` for more details).

Flashing
========

The STM32G0316-DISCO board includes an ST-LINK/V2-1 embedded debug tool
interface.
This interface is supported by the openocd version included in the Zephyr SDK.

Flashing an application to the STM32G0316-DISCO
-----------------------------------------------

Here is an example for the :zephyr:code-sample:`blinky` application.

.. zephyr-app-commands::
   :zephyr-app: samples/basic/blinky
   :board: stm32g0316_disco
   :goals: build flash

You should see the LED blinking every second.

Debugging
=========

You can debug an application in the usual way.  Here is an example for the
:ref:`hello_world` application.

.. zephyr-app-commands::
   :zephyr-app: samples/hello_world
   :board: stm32g0316_disco
   :maybe-skip-config:
   :goals: debug

.. _STM32G031J6 website:
   https://www.st.com/en/microcontrollers-microprocessors/stm32g031j6.html

.. _STM32G031 datasheet:
   https://www.st.com/resource/en/datasheet/stm32g031j6.pdf

.. _STM32G0x1 reference manual:
   https://www.st.com/resource/en/reference_manual/dm00371828.pdf

.. _STM32G0316-DISCO website:
   https://www.st.com/en/evaluation-tools/stm32g0316-disco.html

Part 3

한국어 전문 번역

STM32G0316-DISCO

개요

STM32G0316-DISCO Discovery kit는 SO8 package STM32G0 기능을 탐색하는 보드입니다. STM32G031J6으로 만든 SO8-to-DIL8 module을 제공하며, on-board ST-LINK/V2-1로 MCU를 debug·program합니다.

Hardware

  • SO8 STM32G031J6 Arm Cortex-M0+: Flash 32KB, SRAM 8KB
  • user LED 1개
  • reset/user push-button 1개
  • 분리 가능한 STM32 SO8-to-DIL8 module
  • ST-LINK Micro-B USB connector
  • STM32 programming을 쉽게 하는 DIL8 socket
  • on-board ST-LINK/V2-1 debugger/programmer

Zephyr 지원 기능

InterfaceControllerDriver/Component
NVICon-chipnested vector interrupt controller
UARTon-chipserial port-polling; serial port-interrupt
PINMUXon-chippinmux
GPIOon-chipgpio
CLOCKon-chipreset and clock control
WATCHDOGon-chipindependent watchdog

그 밖의 기능은 현재 지원하지 않습니다. 기본 설정은 boards/st/stm32g0316_disco/stm32g0316_disco_defconfig입니다.

Connections and I/O

SO8의 pin 수가 적어 여러 die I/O가 같은 package pin에 bonded되어 있습니다. 사용 가능한 peripheral 수를 늘리는 방식이므로, 서로 연결된 두 I/O를 동시에 충돌 상태로 설정하면 안 됩니다. 예를 들어 둘 다 output으로 만들고 하나는 low, 다른 하나는 high로 설정하지 않아야 합니다.

기본 Zephyr peripheral mapping

  • UART_1 TX/RX : PA9/PB7 (pins 5/1)
  • USER_PB : PA0 (pin 4)
  • LD2 : PA12 (pin 6)

Programming and debugging

Zephyr SDK OpenOCD가 지원하는 embedded ST-LINK/V2-1을 사용합니다.

west build -b stm32g0316_disco samples/basic/blinky
west flash

LED가 1초마다 깜박여야 합니다.

Debug

west build -b stm32g0316_disco samples/hello_world
west debug

참고 자료

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.