Part 1
요약·해설
지원표 14행, FMC·LTDC 신호 전체, F746G 원문 오기와 216MHz console·flash/debug 절을 보존했습니다.
STM32F750N8
64KB + QSPI
340KB + SDRAM
480×272 touch
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
F7668F0D3CFE3EF8280985C123888161AC249D2E53B7DFDF2EA780C887E1BF8E
.. _stm32f7508_dk_board:
ST STM32F7508-DK Discovery Kit
##############################
Overview
********
The discovery kit enables a wide diversity of applications taking benefit
from audio, multi-sensor support, graphics, security, security, video,
and high-speed connectivity features. Important board features include:
- STM32F750N8H6 microcontroller featuring 64 Kbytes of Flash memory and 340 Kbytes of RAM, in BGA216 package
- On-board ST-LINK/V2-1 supporting USB re-enumeration capability
- Five power supply options:
- ST LINK/V2-1
- USB FS connector
- USB HS connector
- VIN from Arduino connector
- External 5 V from connector
- Two pushbuttons (user and reset)
- USB functions: virtual COM port, mass storage, debug port
- 4.3-inch 480x272 color LCD-TFT with capacitive touch screen
- SAI audio codec
- Audio line in and line out jack
- Two ST MEMS microphones
- SPDIF RCA input connector
- 128-Mbit Quad-SPI Flash memory
- 128-Mbit SDRAM (64 Mbits accessible)
- Connector for microSD card
- USB OTG HS with Micro-AB connectors
- USB OTG FS with Micro-AB connectors
- Ethernet connector compliant with IEEE-802.3-2002
.. image:: ../../../../../../../boards/st/stm32f7508_dk/doc/img/stm32f7508_dk.jpg
:align: center
:alt: STM32F7508-DK
More information about the board can be found at the `32F7508-DK website`_.
Hardware
********
The STM32F7508-DK Discovery kit provides the following hardware components:
- STM32F750N8H6 in BGA216 package
- ARM |reg| 32-bit Cortex |reg| -M7 CPU with FPU
- 216 MHz max CPU frequency
- 64 KB Flash
- 320+16+4 KB SRAM
- GPIO with external interrupt capability
- 4.3-inch 480x272 color LCD-TFT with capacitive touch screen
- 3x12-bit ADC
- 2x12-bit D/A converters
- RTC
- Advanced-control Timer
- General Purpose Timers (17)
- Watchdog Timers (2)
- USART/UART (8)
- I2C (4)
- SPI (6)
- 2xSAI (serial audio interface)
- 2xCAN
- USB 2.0 OTG FS with on-chip PHY
- USB 2.0 OTG HS/FS with dedicated DMA, on-chip full-speed PHY and ULPI
- 10/100 Ethernet MAC with dedicated DMA
- 8- to 14-bit parallel camera
- CRC calculation unit
- True random number generator
- DMA Controller
More information about STM32F750x8 can be found here:
- `STM32F750x8 on www.st.com`_
- `STM32F74xxx reference manual`_
Supported Features
==================
The Zephyr stm32f7508_dk board configuration supports the following hardware features:
+-----------+------------+-------------------------------------+
| Interface | Controller | Driver/Component |
+===========+============+=====================================+
| NVIC | on-chip | nested vector interrupt controller |
+-----------+------------+-------------------------------------+
| UART | on-chip | serial port-polling; |
| | | serial port-interrupt |
+-----------+------------+-------------------------------------+
| PINMUX | on-chip | pinmux |
+-----------+------------+-------------------------------------+
| GPIO | on-chip | gpio |
+-----------+------------+-------------------------------------+
| FLASH | on-chip | flash memory |
+-----------+------------+-------------------------------------+
| ETHERNET | on-chip | Ethernet |
+-----------+------------+-------------------------------------+
| PWM | on-chip | pwm |
+-----------+------------+-------------------------------------+
| I2C | on-chip | i2c |
+-----------+------------+-------------------------------------+
| USB | on-chip | usb |
+-----------+------------+-------------------------------------+
| SDMMC | on-chip | disk access |
+-----------+------------+-------------------------------------+
| SPI | on-chip | spi |
+-----------+------------+-------------------------------------+
| QSPI NOR | on-chip | off-chip flash |
+-----------+------------+-------------------------------------+
| FMC | on-chip | memc (SDRAM) |
+-----------+------------+-------------------------------------+
| LTDC | on-chip | display |
+-----------+------------+-------------------------------------+
Other hardware features are not yet supported on Zephyr porting.
The default configuration can be found in
:zephyr_file:`boards/st/stm32f7508_dk/stm32f7508_dk_defconfig`
Pin Mapping
===========
STM32F7508-DK Discovery kit has 9 GPIO controllers. These controllers are responsible for pin muxing,
input/output, pull-up, etc.
For more details please refer to `32F7508-DK board User Manual`_.
Default Zephyr Peripheral Mapping:
----------------------------------
The STM32F7508 Discovery kit features an Arduino Uno V3 connector. Board is
configured as follows
- UART_1 TX/RX : PA9/PB7 (ST-Link Virtual Port Com)
- UART_6 TX/RX : PC6/PC7 (Arduino Serial)
- I2C1 SCL/SDA : PB8/PB9 (Arduino I2C)
- SDMMC_1 D0/D1/D2/D3/CK/CD/CMD: PC8/PC9/PC10/PC11/PC12/PC13/PD2
- SPI2 NSS/SCK/MISO/MOSI : PA8/PI1/PB14/PB15 (Arduino SPI)
- PWM_3_CH1 : PB4
- ETH : PA1, PA2, PA7, PC1, PC4, PC5, PG11, PG13, PG14
- USER_PB : PI11
- LD1 : PI1
- USB DM : PA11
- USB DP : PA12
- FMC SDRAM :
- D0-D15 : PD14/PD15/PD0/PD1/PE7/PE8/PE9/PE10/PE11/PE12/PE13/PE14/PE15/PD8/PD9/PD10
- A0-A11 : PF0/PF1/PF2/PF3/PF4/PF5/PF12/PF13/PF14/PF15/PG0/PG1
- A14/A15 : PG4/PG5
- SDNRAS/SDNCAS : PF11/PG15
- NBL0/NBL1 : PE0/PE1
- SDCLK/SDNWE/SDCKE0/SDNE0 : PG8/PH5/PC3/PH3
- LTDC :
- R0-R7 : PI15/PJ0/PJ1/PJ2/PJ3/PJ4/PJ5/PJ6
- G0-G7 : PJ7/PJ8/PJ9/PJ10/PJ11/PK0/PK1/PK2
- B0-B7 : PJ12/PK13/PJ14/PJ15/PK3/PK4/PK5/PK6
- DE/CLK/HSYNC/VSYNC : PK7/PI14/PI12/PI13
System Clock
============
The STM32F7508 System Clock can be driven by an internal or external oscillator,
as well as by the main PLL clock. By default, the System clock is driven by the PLL
clock at 216MHz, driven by a 25MHz high speed external clock.
Serial Port
===========
The STM32F7508-DK Discovery kit has up to 8 UARTs. The Zephyr console output is assigned to UART1
which connected to the onboard ST-LINK/V2 Virtual COM port interface. Default communication
settings are 115200 8N1.
Programming and Debugging
*************************
Applications for the ``stm32f7508_dk`` board configuration can be built and
flashed in the usual way (see :ref:`build_an_application` and
:ref:`application_run` for more details).
Flashing
========
STM32F7508-DK Discovery kit includes an ST-LINK/V2 embedded debug tool interface.
This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to STM32F7508-DK
-------------------------------------------
First, connect the STM32F746G Discovery kit to your host computer using
the USB port to prepare it for flashing. Then build and flash your application.
Here is an example for the :ref:`hello_world` application.
.. zephyr-app-commands::
:zephyr-app: samples/hello_world
:board: stm32f7508_dk
:goals: build flash
Run a serial host program to connect with your board:
.. code-block:: console
$ minicom -D /dev/ttyACM0
You should see the following message on the console:
.. code-block:: console
Hello World! arm
Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`hello_world` application.
.. zephyr-app-commands::
:zephyr-app: samples/hello_world
:board: stm32f7508_dk
:goals: debug
.. _32F7508-DK website:
https://www.st.com/en/evaluation-tools/stm32f7508-dk.html
.. _32F7508-DK board User Manual:
https://www.st.com/resource/en/user_manual/dm00537062-discovery-kit-for-stm32f7-series-with-stm32f750n8-mcu-stmicroelectronics.pdf
.. _STM32F750x8 on www.st.com:
https://www.st.com/resource/en/datasheet/stm32f750z8.pdf
.. _STM32F74xxx reference manual:
https://www.st.com/resource/en/reference_manual/dm00124865.pdf
Part 3
한국어 전문 번역

개요
STM32F7508-DK는 audio, multi-sensor, graphics, security, video, high-speed connectivity application을 위한 Discovery kit입니다. 원문은 security를 두 번 반복합니다.
- BGA216 STM32F750N8H6: Flash 64KB, RAM 340KB
- USB re-enumeration ST-LINK/V2-1
- 전원 방식 5개
- ST-LINK/V2-1
- USB FS
- USB HS
- Arduino VIN
- external 5V
- USER·RESET pushbutton
- virtual COM·mass storage·debug USB function
- capacitive touch 4.3-inch 480×272 LCD-TFT
- SAI audio codec
- audio line-in·line-out
- ST MEMS microphone 2개
- SPDIF RCA input
- 128Mbit Quad-SPI Flash
- 128Mbit SDRAM(64Mbit accessible)
- microSD connector
- Micro-AB USB OTG HS·FS
- IEEE-802.3-2002 Ethernet connector
Hardware
- STM32F750N8H6, BGA216
- FPU를 갖춘 ARM 32-bit Cortex-M7 CPU
- 최대 CPU 216MHz
- Flash 64KB
- SRAM 320+16+4KB
- external interrupt GPIO
- capacitive touch 4.3-inch 480×272 LCD-TFT
- 12-bit ADC 3개
- 12-bit DAC 2개
- RTC
- advanced-control timer
- general-purpose timer 17개
- watchdog timer 2개
- USART/UART 8개
- I2C 4개
- SPI 6개
- SAI 2개
- CAN 2개
- on-chip PHY USB 2.0 OTG FS
- dedicated DMA·on-chip FS PHY·ULPI USB 2.0 OTG HS/FS
- dedicated DMA 10/100 Ethernet MAC
- 8~14-bit parallel camera interface
- CRC unit
- true random number generator
- DMA controller
Zephyr 지원 기능
| Interface | Controller | Driver/Component |
|---|---|---|
| NVIC | on-chip | nested vector interrupt controller |
| UART | on-chip | serial port-polling; serial port-interrupt |
| PINMUX | on-chip | pinmux |
| GPIO | on-chip | gpio |
| FLASH | on-chip | flash memory |
| ETHERNET | on-chip | Ethernet |
| PWM | on-chip | pwm |
| I2C | on-chip | i2c |
| USB | on-chip | usb |
| SDMMC | on-chip | disk access |
| SPI | on-chip | spi |
| QSPI NOR | on-chip | off-chip flash |
| FMC | on-chip | memc (SDRAM) |
| LTDC | on-chip | display |
표 밖 기능은 아직 지원하지 않습니다. 기본 설정은 boards/st/stm32f7508_dk/stm32f7508_dk_defconfig입니다.
Pin mapping
GPIO controller 9개와 Arduino Uno V3 connector를 사용합니다.
기본 Zephyr peripheral mapping
UART_1 TX/RX : PA9/PB7 (ST-Link Virtual Port Com)UART_6 TX/RX : PC6/PC7 (Arduino Serial)I2C1 SCL/SDA : PB8/PB9 (Arduino I2C)SDMMC_1 D0/D1/D2/D3/CK/CD/CMD : PC8/PC9/PC10/PC11/PC12/PC13/PD2SPI2 NSS/SCK/MISO/MOSI : PA8/PI1/PB14/PB15 (Arduino SPI)PWM_3_CH1 : PB4ETH : PA1/PA2/PA7/PC1/PC4/PC5/PG11/PG13/PG14USER_PB : PI11LD1 : PI1USB DM : PA11USB DP : PA12
FMC SDRAM
D0-D15 : PD14/PD15/PD0/PD1/PE7/PE8/PE9/PE10/PE11/PE12/PE13/PE14/PE15/PD8/PD9/PD10A0-A11 : PF0/PF1/PF2/PF3/PF4/PF5/PF12/PF13/PF14/PF15/PG0/PG1A14/A15 : PG4/PG5SDNRAS/SDNCAS : PF11/PG15NBL0/NBL1 : PE0/PE1SDCLK/SDNWE/SDCKE0/SDNE0 : PG8/PH5/PC3/PH3
LTDC
R0-R7 : PI15/PJ0/PJ1/PJ2/PJ3/PJ4/PJ5/PJ6G0-G7 : PJ7/PJ8/PJ9/PJ10/PJ11/PK0/PK1/PK2B0-B7 : PJ12/PK13/PJ14/PJ15/PK3/PK4/PK5/PK6DE/CLK/HSYNC/VSYNC : PK7/PI14/PI12/PI13
System clock
기본 system clock은 25MHz high-speed external clock이 구동하는 PLL 216MHz입니다.
Serial port
UART는 최대 8개이며 Zephyr console은 on-board ST-LINK/V2 Virtual COM Port에 연결된 UART1, 기본 통신은 115200 8N1입니다.
Programming and debugging
Zephyr SDK OpenOCD가 지원하는 embedded ST-LINK/V2를 사용합니다.
west build -b stm32f7508_dk samples/hello_world
west flash$ minicom -D /dev/ttyACM0Hello World! armDebug
west build -b stm32f7508_dk samples/hello_world
west debug
참고 자료
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.