MikroElektronika Weather Click 한국어 번역

Part 1

요약·해설

세 environmental quantity와 mikrobus_i2c node label, BME280 sample build를 설명합니다.

Sensor

BME280

Humidity

Relative

Pressure

Barometric

Temperature

Ambient

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기

원문 SHA-256 A4F3871E2A5570CF321E39BC429ECFBB187912CC68301DA3F86AC80C4006DFC9

.. _mikroe_weather_click:

MikroElektronika Weather Click
##############################

Overview
********

The MikroElektronika `Weather Click`_ features the `BME280`_ integrated
environmental sensor in a `mikroBUS`_ |trade| form factor. The sensor can
measure relative humidity, barometric pressure, and ambient temperature.

.. figure:: ../../../../../../../boards/shields/mikroe_weather_click/doc/weather-click.webp
   :align: center
   :alt: MikroElektronika Weather Click

   MikroElektronika Weather Click (Credit: MikroElektronika)

Requirements
************

This shield can only be used with a board that provides a mikroBUS |trade|
socket and defines a ``mikrobus_i2c`` node label for the mikroBUS |trade| I2C
interface (see :ref:`shields` for more details).

For more information about the BME280 and the Weather Click, see the following
documentation:

- `Weather Click`_
- `Weather Click Schematic`_
- `BME280`_
- `BME280 Datasheet`_

Programming
***********

Set ``--shield mikroe_weather_click`` when you invoke ``west build``. For
example:

.. zephyr-app-commands::
   :zephyr-app: samples/sensor/bme280
   :board: lpcxpresso55s16
   :shield: mikroe_weather_click
   :goals: build

.. _Weather Click:
   https://www.mikroe.com/weather-click

.. _Weather Click Schematic:
   https://download.mikroe.com/documents/add-on-boards/click/weather/weather-click-schematic-v101.pdf

.. _BME280:
   https://www.bosch-sensortec.com/products/environmental-sensors/humidity-sensors-bme280/

.. _BME280 Datasheet:
   https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf

.. _mikroBUS:
   https://www.mikroe.com/mikrobus

Part 3

한국어 전문 번역

개요

MikroElektronika Weather Click은 mikroBUS form factor에 BME280 integrated environmental sensor를 탑재합니다. Relative humidity, barometric pressure, ambient temperature를 측정할 수 있습니다.

요구 사항

mikroBUS socket을 제공하고 mikroBUS I2C interface에 mikrobus_i2c node label을 정의한 board에서만 사용할 수 있습니다.

프로그래밍

west build에 --shield mikroe_weather_click을 지정합니다.

west build -b lpcxpresso55s16   --shield mikroe_weather_click   samples/sensor/bme280

참고 자료

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.

MikroElektronika Weather Click

2.7.0 LTS2 · 준비 중