LMP90100 Sensor AFE Evaluation Board 한국어 번역

Part 1

요약·해설

Arduino header와 SPIO connector의 jumper 연결 요구, Zephyr RTD sample과 FRDM-K64F build를 설명합니다.

AFE

LMP90100

Resolution

24-bit

Interface

SPI

Sample

RTD

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기

원문 SHA-256 98B9B15AFC19FFBA1C27B4FAA7CE90D81BC70718BF03B958697AE5776C927DF9

.. _lmp90100_evb_shield:

LMP90100 Sensor AFE Evaluation Board
####################################

Overview
********

The Texas Instruments LMP90100 Sensor AFE Evaluation Board (EVB) is a
development kit for the TI LMP90xxx series of analog sensor frontends.

.. figure:: ../../../../../../../boards/shields/lmp90100_evb/doc/lmp90100eb_lmp90100eb.jpg
   :align: center
   :alt: LMP90100 EVB

   LMP90100 EVB (Credit: Texas Instruments)

Requirements
************

This shield can only be used with a development board that provides a
configuration for Arduino connectors and defines a node alias for the
SPI interface (see :ref:`shields` for more details).

The SPIO connector pins on the LMP90100 EVB can be connected to the
Arduino headers of the development board using jumper wires.

For more information about interfacing the LMP90xxx series and the
LMP90100 EVB in particular, see these TI documents:

- `LMP90100 Sensor AFE Evaluation Board User's Guide`_
- `LMP90100 Multi-Channel, Low Power 24-Bit Sensor AFE`_

Samples
*******

Zephyr RTOS includes one sample targeting the LMP90100 EVB:

* :ref:`lmp90100_evb_rtd_sample`

Programming
***********

Set ``--shield lmp90100_evb`` when you invoke ``west build``. For example:

.. zephyr-app-commands::
   :zephyr-app: samples/shields/lmp90100_evb/rtd
   :board: frdm_k64f
   :shield: lmp90100_evb
   :goals: build

.. _LMP90100 Sensor AFE Evaluation Board User's Guide:
   https://www.farnell.com/datasheets/1604987.pdf

.. _LMP90100 Multi-Channel, Low Power 24-Bit Sensor AFE:
   http://www.ti.com/product/LMP90100

Part 3

한국어 전문 번역

개요

Texas Instruments LMP90100 Sensor AFE Evaluation Board(EVB)는 TI LMP90xxx series analog sensor frontend용 development kit입니다.

요구 사항

Arduino connector configuration과 SPI interface용 node alias를 제공하는 development board에서만 사용할 수 있습니다. LMP90100 EVB의 SPIO connector pin은 jumper wire로 development board의 Arduino header에 연결할 수 있습니다.

Sample

Zephyr에는 LMP90100 EVB의 RTD(resistance temperature detector)를 대상으로 하는 sample 하나가 포함되어 있습니다.

프로그래밍

west build를 실행할 때 --shield lmp90100_evb를 지정합니다.

west build -b frdm_k64f   --shield lmp90100_evb   samples/shields/lmp90100_evb/rtd

참고 자료

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.

LMP90100 Sensor AFE Evaluation Board

2.7.0 LTS2 · 준비 중