boards/shields/frdm_stbc_agm01/doc/index.html · boards/shields/frdm_stbc_agm01/doc/index.rst 공식 원문 ↗

Zephyr 3.7.0 · Shields · NXP · 9-axis Sensor

NXP FRDM-STBC-AGM01

E-compass와 gyroscope를 결합해 Arduino R3 board에 9-axis sensing을 추가합니다.

Official pathboards/shields/frdm_stbc_agm01/doc/index.html
Source fileboards/shields/frdm_stbc_agm01/doc/index.rst
Source versionZephyr 3.7.0
TranslationFull · reviewed

본문 기준: Zephyr 3.7.0 LTS3 · 이후 유지보수 패치는 별도입니다.

Part 1

요약·해설

두 I2C bus, 각 sensor의 INT1/INT2, reset GPIO를 포함한 9-pin mapping과 gyroscope sample을 설명합니다.

Gyroscope

FXAS21002C

E-compass

FXOS8700CQ

Axes

9-axis solution

Host

Arduino R3

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기
원문 SHA-256 C9EF96F69A8124557F203D24FCC338196ED07A7D3B454E81BF11A1F954B01ED0
.. _frdm_stbc_agm01_shield:

NXP FRDM-STBC-AGM01
###################

Overview
********

The FRDM-STBC-AGM01 is an NXP Freedom development board with
FXOS8700 and FXAS21002. This 9-axis solution (FXAS21002C Gyroscope,
+ FXOS8700CQ E-compass sensor) is compatible with any board that
provides an Arduino R3 header.

.. image:: ../../../../../../../boards/shields/frdm_stbc_agm01/doc/AGM01.jpg
   :align: center
   :alt: FRDM-STBC-AGM01

Pin Assignment of the FRDM-STBC-AGM01 Shield
============================================

+-----------------------+---------------------+
| Shield Connector Pin  | Function            |
+=======================+=====================+
| A5                    | I2C - SCL1          |
+-----------------------+---------------------+
| A4                    | I2C - SDA1          |
+-----------------------+---------------------+
| D15                   | I2C - SCL0          |
+-----------------------+---------------------+
| D14                   | I2C - SDA0          |
+-----------------------+---------------------+
| D2                    | INT1 - 8700         |
+-----------------------+---------------------+
| D4                    | INT2 - 8700         |
+-----------------------+---------------------+
| D5                    | INT1 - 21002        |
+-----------------------+---------------------+
| D8                    | INT2 - 21002        |
+-----------------------+---------------------+
| A3                    | RST - GPIO          |
+-----------------------+---------------------+

For more information about the FXOS8700, FXAS21002, and FRDM-STBC-AGM01
board:

- :ref:`fxos8700`
- :ref:`fxas21002`
- `FRDM-STBC-AGM01 Website`_
- `FRDM-STBC-AGM01 Quick Reference Card`_
- `FRDM-STBC-AGM01 Schematics`_

Programming
***********

Set ``--shield frdm_stbc_agm01`` when you invoke ``west build``. For example:

.. zephyr-app-commands::
   :zephyr-app: samples/sensor/fxas21002
   :board: frdm_k22f
   :shield: frdm_stbc_agm01
   :goals: build

.. _FRDM-STBC-AGM01 Website:
   https://www.nxp.com/design/development-boards/freedom-development-boards/sensors/sensor-toolbox-development-boards-for-a-9-axis-solution-using-fxas21002c-and-fxos8700cq:FRDM-STBC-AGM01

.. _FRDM-STBC-AGM01 Quick Reference Card:
   https://www.nxp.com/docs/en/supporting-information/FRDM-STBC-AGM01-QRC.pdf

.. _FRDM-STBC-AGM01 Schematics:
   https://www.nxp.com/downloads/en/schematics/FRDM-STBC-AGM01-SCH.pdf

Part 3

한국어 전문 번역

개요

FRDM-STBC-AGM01은 FXOS8700과 FXAS21002를 탑재한 NXP Freedom development board입니다. FXAS21002C gyroscope와 FXOS8700CQ e-compass sensor를 결합한 9-axis solution이며 Arduino R3 header를 제공하는 모든 board와 호환됩니다.

FRDM-STBC-AGM01
NXP FRDM-STBC-AGM01

Pin assignment

Shield connector pinFunction
A5I2C - SCL1
A4I2C - SDA1
D15I2C - SCL0
D14I2C - SDA0
D2INT1 - 8700
D4INT2 - 8700
D5INT1 - 21002
D8INT2 - 21002
A3RST - GPIO

프로그래밍

west build를 실행할 때 --shield frdm_stbc_agm01을 지정합니다. 다음 예시는 FRDM-K22F용 FXAS21002 sensor sample을 빌드합니다.

west build -b frdm_k22f   --shield frdm_stbc_agm01   samples/sensor/fxas21002

참고 자료

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.