Part 1
요약·해설
두 I2C bus, 각 sensor의 INT1/INT2, reset GPIO를 포함한 9-pin mapping과 gyroscope sample을 설명합니다.
Gyroscope
FXAS21002C
E-compass
FXOS8700CQ
Axes
9-axis solution
Host
Arduino R3
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
원문 SHA-256
C9EF96F69A8124557F203D24FCC338196ED07A7D3B454E81BF11A1F954B01ED0
.. _frdm_stbc_agm01_shield:
NXP FRDM-STBC-AGM01
###################
Overview
********
The FRDM-STBC-AGM01 is an NXP Freedom development board with
FXOS8700 and FXAS21002. This 9-axis solution (FXAS21002C Gyroscope,
+ FXOS8700CQ E-compass sensor) is compatible with any board that
provides an Arduino R3 header.
.. image:: ../../../../../../../boards/shields/frdm_stbc_agm01/doc/AGM01.jpg
:align: center
:alt: FRDM-STBC-AGM01
Pin Assignment of the FRDM-STBC-AGM01 Shield
============================================
+-----------------------+---------------------+
| Shield Connector Pin | Function |
+=======================+=====================+
| A5 | I2C - SCL1 |
+-----------------------+---------------------+
| A4 | I2C - SDA1 |
+-----------------------+---------------------+
| D15 | I2C - SCL0 |
+-----------------------+---------------------+
| D14 | I2C - SDA0 |
+-----------------------+---------------------+
| D2 | INT1 - 8700 |
+-----------------------+---------------------+
| D4 | INT2 - 8700 |
+-----------------------+---------------------+
| D5 | INT1 - 21002 |
+-----------------------+---------------------+
| D8 | INT2 - 21002 |
+-----------------------+---------------------+
| A3 | RST - GPIO |
+-----------------------+---------------------+
For more information about the FXOS8700, FXAS21002, and FRDM-STBC-AGM01
board:
- :ref:`fxos8700`
- :ref:`fxas21002`
- `FRDM-STBC-AGM01 Website`_
- `FRDM-STBC-AGM01 Quick Reference Card`_
- `FRDM-STBC-AGM01 Schematics`_
Programming
***********
Set ``--shield frdm_stbc_agm01`` when you invoke ``west build``. For example:
.. zephyr-app-commands::
:zephyr-app: samples/sensor/fxas21002
:board: frdm_k22f
:shield: frdm_stbc_agm01
:goals: build
.. _FRDM-STBC-AGM01 Website:
https://www.nxp.com/design/development-boards/freedom-development-boards/sensors/sensor-toolbox-development-boards-for-a-9-axis-solution-using-fxas21002c-and-fxos8700cq:FRDM-STBC-AGM01
.. _FRDM-STBC-AGM01 Quick Reference Card:
https://www.nxp.com/docs/en/supporting-information/FRDM-STBC-AGM01-QRC.pdf
.. _FRDM-STBC-AGM01 Schematics:
https://www.nxp.com/downloads/en/schematics/FRDM-STBC-AGM01-SCH.pdf
Part 3
한국어 전문 번역
개요
FRDM-STBC-AGM01은 FXOS8700과 FXAS21002를 탑재한 NXP Freedom development board입니다. FXAS21002C gyroscope와 FXOS8700CQ e-compass sensor를 결합한 9-axis solution이며 Arduino R3 header를 제공하는 모든 board와 호환됩니다.

Pin assignment
| Shield connector pin | Function |
|---|---|
| A5 | I2C - SCL1 |
| A4 | I2C - SDA1 |
| D15 | I2C - SCL0 |
| D14 | I2C - SDA0 |
| D2 | INT1 - 8700 |
| D4 | INT2 - 8700 |
| D5 | INT1 - 21002 |
| D8 | INT2 - 21002 |
| A3 | RST - GPIO |
프로그래밍
west build를 실행할 때 --shield frdm_stbc_agm01을 지정합니다. 다음 예시는 FRDM-K22F용 FXAS21002 sensor sample을 빌드합니다.
west build -b frdm_k22f --shield frdm_stbc_agm01 samples/sensor/fxas21002
참고 자료
- Zephyr FXOS8700 driver documentation
- Zephyr FXAS21002 driver documentation
- FRDM-STBC-AGM01 website
- Quick reference card
- Schematics
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.