Part 1
요약·해설
ADL-N configuration은 N100·N200·N300·N305 계열 reference board에 Zephyr kernel support를 제공합니다.
Alder Lake N · 64-bit multicore
ADL-N CRB · RVP
UEFI · zephyr.efi
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
7634859A3EE93D4031CFCFD0D6917EC395C181C6EA9CEBC95759FA6849AA0102
.. _intel_adl_n:
Alder Lake N
############
Overview
********
Alder Lake processor is a 64-bit multi-core processor built on 10-nanometer
technology process.
Currently supported is N-processor line, Single Chip Platform that consists of
the Processor Die and Alder Lake N Platform Controller Hub (ADL-N PCH) Die on
the same package as Multi-Chip Package (MCP).
Proposed branding for Adler Lake N is Intel Processor (N100,N200) and
Intel Core i3 (N300, N305).
Alder Lake N Customer Reference Board (ADL-N CRB) and Alder Lake Reference
Validation Platform (ADL-N RVP) are example implementations of compact single
board computer with high performance for IoT edge devices.
This board configuration enables kernel support for the Alder Lake N boards.
Hardware
********
General information about the board can be found at the `INTEL_ADL`_ website.
Connections and IOs
===================
Refer to the `INTEL_ADL`_ website for more information.
Programming and Debugging
*************************
Use the following procedures for booting an image for an Alder Lake N CRB board.
.. contents::
:depth: 1
:local:
:backlinks: top
Build Zephyr application
========================
#. Build a Zephyr application; for instance, to build the ``hello_world``
application for Alder Lake N CRB:
.. zephyr-app-commands::
:zephyr-app: samples/hello_world
:board: intel_adl_crb
:goals: build
.. note::
A Zephyr EFI image file named :file:`zephyr.efi` is automatically
created in the build directory after the application is built.
Booting the Alder Lake N CRB Board using UEFI
=============================================
.. include:: ../../../../../../../boards/intel/common/efi_boot.rst
:start-after: start_include_here
.. _INTEL_ADL: https://edc.intel.com/content/www/us/en/design/products/platforms/processor-and-core-i3-n-series-datasheet-volume-1-of-2/
Part 3
한국어 전문 번역
개요
Alder Lake processor는 10nm technology process로 제작된 64-bit multi-core processor입니다.
현재 지원 대상은 N-processor line입니다. 이 제품은 Processor Die와 Alder Lake N Platform Controller Hub(ADL-N PCH) Die를 하나의 Multi-Chip Package(MCP)에 넣은 Single Chip Platform입니다.
Alder Lake N의 제안된 branding은 Intel Processor N100·N200과 Intel Core i3 N300·N305입니다.
Alder Lake N Customer Reference Board(ADL-N CRB)와 Alder Lake Reference Validation Platform(ADL-N RVP)은 IoT edge device용 고성능 compact single-board computer의 구현 예입니다. 이 board configuration은 Alder Lake N board용 Zephyr kernel support를 활성화합니다.
Hardware
Board 일반 정보와 connection·I/O 세부사항은 Intel Processor and Core i3 N-Series Datasheet에서 확인할 수 있습니다.
Programming과 Debugging
Alder Lake N CRB에서 image를 boot하려면 다음 절차를 사용합니다.
Zephyr application build
예를 들어 Alder Lake N CRB용 hello_world application은 다음과 같이 build합니다.
west build -b intel_adl_crb samples/hello_world
Boot device 준비
Zephyr application image를 board에서 boot할 USB flash drive를 준비합니다.
- USB flash drive를 FAT32로 format합니다. Windows에서는 File Explorer에서 USB drive를 오른쪽 click하고 Format...을 선택한 뒤 File System을 FAT32로 지정합니다. Linux에서는
gparted같은 graphical utility를 사용하거나 terminal에서 USB device node(예:/dev/sdd)를 확인한 뒤 다음 명령을 실행합니다.mkfs.vfat -F 32 <device-node> - Zephyr EFI image
zephyr/zephyr.efi를 USB drive로 복사합니다.
Board에서 Zephyr boot
USB flash drive를 연결한 상태로 board를 EFI shell까지 boot합니다.
- 준비한 USB flash drive를 board에 삽입합니다.
- Serial cable로 board와 host를 연결하고 serial data를 볼 수 있게 host를 설정합니다. Baud rate는
115200을 사용합니다. - Board 전원을 켭니다.
- 다음 출력이 나타나면 F7을 누릅니다.
Press <DEL> or <ESC> to enter setup. - 표시된 menu에서 해당 EFI shell entry를 선택합니다.
- EFI shell에서 Zephyr EFI image를 선택해 boot합니다.
Shell> fs0:zephyr.efi - Boot process가 끝나면 Zephyr application image의 boot가 완료된 것입니다.
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.