요약·해설, 영어 원문, 전체 번역을 구분해 실었습니다. API 이름, 코드 심벌, 소스 경로는 원문 표기를 유지합니다.
1. 요약·해설
원문의 핵심 내용을 정리하고 커널 프로그래밍에 필요한 설명을 덧붙였습니다. 아래의 전체 번역과는 별도로 작성한 해설입니다.
2. 영어 원문 전체
번역에 사용한 Linux v6.18.37 원문입니다. 줄 번호는 해당 버전의 소스 파일을 기준으로 합니다.
원문 전체 펼치기
* Silicon Labs FM Radio transmitter
The Silicon Labs Si4713 is an FM radio transmitter with receive power scan
supporting 76-108 MHz. It includes an RDS encoder and has both, a stereo-analog
and a digital interface, which supports I2S, left-justified and a custom
DSP-mode format. It is programmable through an I2C interface.
Required Properties:
- compatible: Should contain "silabs,si4713"
- reg: the I2C address of the device
Optional Properties:
- interrupts-extended: Interrupt specifier for the chips interrupt
- reset-gpios: GPIO specifier for the chips reset line
- vdd-supply: phandle for Vdd regulator
- vio-supply: phandle for Vio regulator
Example:
&i2c2 {
fmtx: si4713@63 {
compatible = "silabs,si4713";
reg = <0x63>;
interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
vio-supply = <&vio>;
vdd-supply = <&vaux1>;
};
};
3. 한국어 전문 번역
영어 원문의 문단 순서와 의미에 맞춰 전체 내용을 번역했습니다. 코드, 함수명, 코드 심벌, URL은 원문 표기를 유지합니다.
Si4713 FM transmitter
1-17Silicon Labs Si4713은 76~108MHz receive power scan을 지원하는 FM radio transmitter입니다. RDS encoder를 내장하고 stereo analog interface와 I2S, left-justified, custom DSP-mode format을 지원하는 digital interface를 가지며 I2C로 program합니다.
필수 `compatible`은 `silabs,si4713`, `reg`는 I2C address입니다. 선택적인 `interrupts-extended`는 chip interrupt specifier, `reset-gpios`는 reset line GPIO, `vdd-supply`와 `vio-supply`는 각각 Vdd와 Vio regulator phandle입니다.
Analog 또는 digital audio와 RDS를 FM carrier로 송신하고 receive power scan도 수행합니다.
I2C 0x63 transmitter 예제
18-30예제는 I2C2 주소 `0x63`에 Si4713을 두고 GPIO2 line 21 falling-edge interrupt, GPIO6 line 3 active-high reset, `vio`와 `vaux1` regulator를 연결합니다.
&i2c2 {
fmtx: si4713@63 {
compatible = "silabs,si4713";
reg = <0x63>;
interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
vio-supply = <&vio>;
vdd-supply = <&vaux1>;
};
};
요약과 해설
si4713.txt:1-30I2C transmitter의 reset·supply 예제를 설명합니다.