범용 digital humidity·temperature polling 한국어 번역

Part 1

요약·해설

HS300x alias, fixture_i2c_hs300x와 11줄 측정 출력을 보존합니다.

Sensors

Up to 10

Alias

dht0 ··· dht9

Fixture

I2C HS300x

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기

원문 SHA-256 871E58871258180AE4BD4BB028C8A908758A414CAE9D7E919AE92430998AE4AE

.. _dht_polling:

Generic Digital Humidity Temperature sensor polling sample
##########################################################

Overview
********

This sample application demonstrates how to use digital humidity temperature
sensors.

Building and Running
********************

This sample supports up to 10 humidity/temperature sensors. Each sensor needs to
be aliased as ``dhtN`` where ``N`` goes from ``0`` to ``9``. For example:

.. code-block:: devicetree

  / {
	aliases {
			dht0 = &hs300x;
		};
	};


Make sure the aliases are in devicetree.

It also requires a correct fixture setup when the sensor is present.
For the correct execution of that sample in twister, add into boards's
map-file next fixture settings::

      - fixture: fixture_i2c_hs300x


Then build and run with:

.. zephyr-app-commands::
   :zephyr-app: samples/sensor/dht_polling
   :board: <board to use>
   :goals: build flash
   :compact:

Sample Output
=============

.. code-block:: console

       hs300x@44: temp is 25.31 °C humidity is 30.39 %RH
       hs300x@44: temp is 25.51 °C humidity is 30.44 %RH
       hs300x@44: temp is 25.51 °C humidity is 30.37 %RH
       hs300x@44: temp is 25.51 °C humidity is 30.39 %RH
       hs300x@44: temp is 25.31 °C humidity is 30.37 %RH
       hs300x@44: temp is 25.31 °C humidity is 30.35 %RH
       hs300x@44: temp is 25.51 °C humidity is 30.37 %RH
       hs300x@44: temp is 25.51 °C humidity is 30.37 %RH
       hs300x@44: temp is 25.51 °C humidity is 30.39 %RH
       hs300x@44: temp is 25.51 °C humidity is 30.44 %RH
       hs300x@44: temp is 25.51 °C humidity is 30.53 %RH

Part 3

한국어 전문 번역

개요

이 sample application은 digital humidity·temperature sensor를 사용하는 방법을 보여 줍니다.

빌드 및 실행

이 sample은 humidity·temperature sensor를 최대 10개까지 지원합니다. 각 sensor에는 dhtN 형식의 alias가 필요하며, N에는 0부터 9까지의 번호가 들어갑니다. 예:

/ {
      aliases {
                      dht0 = &hs300x;
              };
      };

Alias가 Devicetree에 정의되어 있는지 확인합니다.

Sensor가 실제로 연결된 경우에는 올바른 fixture setup도 필요합니다. Twister에서 이 sample을 정상 실행하려면 board map file에 다음 fixture setting을 추가합니다.

- fixture: fixture_i2c_hs300x

그런 다음 다음 명령으로 build하고 실행합니다.

west build -b <board to use> samples/sensor/dht_polling
west flash

출력 예

hs300x@44: temp is 25.31 °C humidity is 30.39 %RH
hs300x@44: temp is 25.51 °C humidity is 30.44 %RH
hs300x@44: temp is 25.51 °C humidity is 30.37 %RH
hs300x@44: temp is 25.51 °C humidity is 30.39 %RH
hs300x@44: temp is 25.31 °C humidity is 30.37 %RH
hs300x@44: temp is 25.31 °C humidity is 30.35 %RH
hs300x@44: temp is 25.51 °C humidity is 30.37 %RH
hs300x@44: temp is 25.51 °C humidity is 30.37 %RH
hs300x@44: temp is 25.51 °C humidity is 30.39 %RH
hs300x@44: temp is 25.51 °C humidity is 30.44 %RH
hs300x@44: temp is 25.51 °C humidity is 30.53 %RH

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.

범용 digital humidity·temperature polling

2.7.0 LTS2 · 준비 중

요약·해설

접을 수 있는 영어 원문 전체

한국어 전문 번역

개요

빌드 및 실행

출력 예

출처