Part 1
요약·해설
innblue22/nrf9160 요구 사항과 모든 측정 parameter·단위를 보존합니다.
Electrical
V · A · mW
Capacity
mAh
Health
SOC · SOH
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
원문 SHA-256
F7F701E742C85F9CFF43CF01A1075F56BE18DE0C559A923C9972BEE3749AE0E3
.. _bq274xx-sample:
BQ274XX Sensor Sample
#####################
Overview
********
This sample application retrieves all the fuel gauge parameters:
- Voltage, in volts
- Average current, in amps
- Standby current, in amps
- Maximum load current, in amps
- Gauge temperature
- State of charge measurement in percentage
- Full Charge Capacity in mAh
- Remaining Charge Capacity in mAh
- Nominal Available Capacity in mAh
- Full Available Capacity in mAh
- Average power in mW
- State of health measurement in percentage
from BQ274XX sensor and prints this information to the UART console.
Requirements
************
- innblue22/nrf9160 board with BQ274XX sensor `BQ274XX Sensor`_
Building and Running
********************
Build this sample using the following commands:
.. zephyr-app-commands::
:zephyr-app: samples/sensor/bq274xx
:board: innblue22/nrf9160
:goals: build flash
References
**********
.. target-notes::
.. _BQ274XX Sensor: http://www.ti.com/lit/ds/symlink/bq27421-g1.pdf
Part 3
한국어 전문 번역
개요
이 sample application은 BQ274XX sensor에서 다음 fuel gauge parameter를 모두 읽어 UART console에 출력합니다.
- Voltage(V)
- Average current(A)
- Standby current(A)
- Maximum load current(A)
- Gauge temperature
- State of charge(%)
- Full Charge Capacity(mAh)
- Remaining Charge Capacity(mAh)
- Nominal Available Capacity(mAh)
- Full Available Capacity(mAh)
- Average power(mW)
- State of health(%)
요구 사항
- BQ274XX sensor가 있는
innblue22/nrf9160board
빌드 및 실행
다음 명령으로 sample을 build하고 flash합니다.
# From the root of the zephyr repository
west build -b innblue22/nrf9160 samples/sensor/bq274xx
west flash참고 자료
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.