Part 1
요약·해설
dev0 alias, compatible binding과 Apollo3P build·출력을 보존합니다.
Alias
dev0
Device
mspi-aps6404l
Mode
Asynchronous
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
원문 SHA-256
849901D87BD18E1A5F82CB8692CF594A3BCF87A048159FCAE8DDDC14660E05AB
.. zephyr:code-sample:: mspi-async
:name: MSPI asynchronous transfer
:relevant-api: mspi_interface
Use the MSPI API to interact with MSPI memory device asynchronously.
Overview
********
This sample demonstrates using the :ref:`MSPI API <mspi_api>` on a MSPI
memory device. The asynchronous transceive call need to be supported
either by a software queue or hardware queue from the controller hardware.
To this sample, however, the implementation should make no difference.
Building and Running
********************
The application will build only for a target that has a :ref:`devicetree <dt-guide>`
``dev0`` alias that refers to an entry with the following bindings as a compatible:
* :dtcompatible:`ambiq,mspi-device`, `mspi-aps6404l`
.. zephyr-app-commands::
:zephyr-app: samples/drivers/mspi/mspi_async
:board: apollo3p_evb
:goals: build flash
:compact:
Sample Output
=============
.. code-block:: console
*** Booting Zephyr OS build zephyr-v3.5.0-8581-gc80b243c7598 ***
w:3,r:3
Read data matches written data
Part 3
한국어 전문 번역
개요
이 sample은 MSPI memory device에서 MSPI API를 사용하는 방법을 보여줍니다. 비동기 transceive 호출은 software queue 또는 controller hardware의 hardware queue 중 하나에서 지원해야 합니다. 하지만 이 sample의 관점에서는 어느 구현을 사용하든 차이가 없습니다.
Build와 실행
Application은 devicetree의 dev0 alias가 다음 compatible binding을 가진 entry를 가리키는 target에서만 build됩니다.
ambiq,mspi-device,mspi-aps6404l
west build -b apollo3p_evb samples/drivers/mspi/mspi_async
west flash
Sample 출력
*** Booting Zephyr OS build zephyr-v3.5.0-8581-gc80b243c7598 ***
w:3,r:3
Read data matches written data
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.