Part 1
요약·해설
I2C0 주소 0x32, nRF52840 DK build와 전체 출력을 보존합니다.
Channels
9
Address
0x32
Board
nRF52840 DK
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
원문 SHA-256
A43E4D7B616603F2FD37843FE0FB6ED6AC505AE340F1B78113E19CBD8FBB9F5B
.. zephyr:code-sample:: lp5569
:name: LP5569 9-channel LED controller
:relevant-api: led_interface
Control 9 LEDs connected to an LP5569 driver chip.
Overview
********
This sample controls 9 LEDs connected to an LP5569 driver. The sample turns
all LEDs on and switches all LEDs off again within a one second interval.
Building and Running
********************
Build the application for the :ref:`nrf52840dk_nrf52840` board, and connect
a LP5569 LED controller on the bus I2C0 at the address 0x32.
.. zephyr-app-commands::
:zephyr-app: samples/drivers/led_lp5569
:board: nrf52840dk/nrf52840
:goals: build
:compact:
For flashing the application, refer to the Flashing section of the
:ref:`nrf52840dk_nrf52840` board documentation.
.. code-block:: none
*** Booting Zephyr OS build zephyr-v3.3.0 ***
[00:00:00.361,694] <inf> app: Found LED device lp5569@32
[00:00:00.361,694] <inf> app: Testing 9 LEDs ..
References
**********
- LP5569 Datasheet: https://www.ti.com/product/de-de/LP5569
Part 3
한국어 전문 번역
개요
이 sample은 LP5569 driver에 연결된 LED 9개를 제어합니다. 1초 간격으로 모든 LED를 켰다가 다시 모두 끕니다.
Build와 실행
nrf52840dk/nrf52840 board용 application을 build하고 LP5569 LED controller를 주소 0x32로 I2C0 bus에 연결합니다.
west build -b nrf52840dk/nrf52840 samples/drivers/led_lp5569
Application을 flash하는 방법은 nrf52840dk/nrf52840 board 문서의 Flashing 절을 참조하십시오.
*** Booting Zephyr OS build zephyr-v3.3.0 ***
[00:00:00.361,694] <inf> app: Found LED device lp5569@32
[00:00:00.361,694] <inf> app: Testing 9 LEDs ..
참고 자료
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.