Part 1
요약·해설
Mode 선택, ball launch, second-device 탐색과 pin 0 buzzer 동작을 설명합니다.
Single · Multi
Button A · B
Bluetooth micro:bit
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
940FA7A5856A9631B2FBC11AA734FC85EF2418A97E4D985B0D4820E0233B472D
.. _microbit_pong:
BBC micro:bit pong game
#######################
Overview
********
Play pong over as single player or Bluetooth between two micro:bit
devices.
The game works by controlling a paddle with the two buttons of the
micro:bit (labeled A and B). Initially the playing mode is selected: use
button A to toggle between single- and multi-player, and press button B
to select the current choice. To start the game, the player with the
ball launches the ball by pressing both buttons.
When multi-player mode has been selected the game will try to look for
and connect to a second micro:bit which has also been set into multi-
player mode.
If the board has a piezo buzzer connected to pin 0, this will be used to
generate beeps whenever the ball hits a wall or the paddle.
Building and running
********************
.. zephyr-app-commands::
:zephyr-app: samples/boards/bbc_microbit/pong
:board: bbc_microbit
:goals: build flash
:compact:
Part 3
한국어 전문 번역
개요
Pong을 single-player로 즐기거나 두 micro:bit device를 Bluetooth로 연결해 two-player로 즐길 수 있습니다.
Micro:bit의 A·B button 두 개로 paddle을 조작합니다. 처음에는 play mode를 선택합니다. A button으로 single-player와 multi-player를 전환하고 B button으로 현재 선택을 확정합니다. Game을 시작하려면 ball을 가진 player가 두 button을 동시에 눌러 ball을 발사합니다.
Multi-player mode를 선택하면 game은 역시 multi-player mode로 설정된 두 번째 micro:bit를 찾아 연결하려고 시도합니다.
Board의 pin 0에 piezo buzzer가 연결되어 있으면 ball이 wall이나 paddle에 부딪힐 때마다 beep를 냅니다.
Build와 실행
west build -b bbc_microbit samples/boards/bbc_microbit/pong
west flash
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.