connectivity/bluetooth/api/mesh/sar_cfg_srv.html · connectivity/bluetooth/api/mesh/sar_cfg_srv.rst 공식 원문 ↗

Zephyr 3.7.0 · Connectivity · Bluetooth Mesh 1.1

SAR Configuration Server

Node lower transport의 SAR Transmitter·Receiver state와 message를 제공합니다.

Official pathconnectivity/bluetooth/api/mesh/sar_cfg_srv.html
Source fileconnectivity/bluetooth/api/mesh/sar_cfg_srv.rst
Source versionZephyr 3.7.0
TranslationFull · reviewed

본문 기준: Zephyr 3.7.0 LTS3 · 이후 유지보수 패치는 별도입니다.

Part 1

요약·해설

두 state, get/set message, Client 종속 제어와 device-key 제한을 설명합니다.

States

2

Messages

Get · set

Presence

Optional

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기
원문 SHA-256 D36CDBC3FB598DD2D16EA459FB8EDC53D745D94A0A945F4B0013DDE67D813CE4
.. _bluetooth_mesh_sar_cfg_srv:

SAR Configuration Server
########################

The SAR Configuration Server model is a foundation model defined by the Bluetooth Mesh
specification. It is an optional model, enabled with the
:kconfig:option:`CONFIG_BT_MESH_SAR_CFG_SRV` configuration option.

The SAR Configuration Server model is introduced in the Bluetooth Mesh Protocol Specification
version 1.1, and it supports the configuration of the
:ref:`segmentation and reassembly (SAR) <bluetooth_mesh_sar_cfg>` behavior of a Bluetooth Mesh node.
The model defines a set of states and messages for the SAR configuration.

The SAR Configuration Server model defines two states, SAR Transmitter state and SAR Receiver state.
For more information about the two states, see :ref:`bt_mesh_sar_cfg_states`.

The model also supports the SAR Transmitter and SAR Receiver get and set messages.

The SAR Configuration Server model does not have an API of its own, but relies on a
:ref:`bluetooth_mesh_sar_cfg_cli` to control it.  The SAR Configuration Server model only accepts
messages encrypted with the node’s device key.

If present, the SAR Configuration Server model must only be instantiated on the primary element.

API reference
*************

.. doxygengroup:: bt_mesh_sar_cfg_srv
   :project: Zephyr
   :members:

Part 3

한국어 전문 번역

SAR Configuration Server

Bluetooth Mesh specification이 정의한 optional foundation model이며 CONFIG_BT_MESH_SAR_CFG_SRV로 활성화합니다.

Bluetooth Mesh Protocol Specification 1.1에 도입됐고 Bluetooth Mesh node의 SAR behavior를 구성하는 state와 message를 정의합니다.

SAR Transmitter state와 SAR Receiver state 두 개를 정의하며 각 state의 get·set message를 지원합니다.

자체 API는 없고 SAR Configuration Client가 제어합니다. Node device key로 encryption된 message만 받아들이며 primary element에만 instance화해야 합니다.

API Reference

공식 bt_mesh_sar_cfg_srv Doxygen group이 SAR Configuration Server model을 생성합니다.

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.