build/dts/api/bindings/led/nordic,npm1300-led.html · build/dts/api/bindings/led/nordic,npm1300-led.rst 공식 원문 ↗

Zephyr 3.7.0 · Devicetree · LED · Nordic Semiconductor

Nordic nPM1300 LED Controller 바인딩

nPM1300의 오류·충전·software-controlled LED mode를 정의하는 3개 property schema입니다.

Official pathbuild/dts/api/bindings/led/nordic,npm1300-led.html
Source filebuild/dts/api/bindings/led/nordic,npm1300-led.rst
Source versionZephyr 3.7.0
TranslationFull · reviewed

본문 기준: Zephyr 3.7.0 LTS3 · 이후 유지보수 패치는 별도입니다.

Part 1

요약·해설

공식 원문 96줄과 property 3행을 전수 대조해 three required per-output modes·exact legal values·absence of invented base fields 제약을 보존했습니다.

Compatible

nordic,npm1300-led

Vendor

Nordic Semiconductor

Properties

3 rows

Interface

three PMIC LED outputs with hardware/host modes

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기
원문 SHA-256 99B21252AB718AD8091C0EB9D10F876C8B2203FAA849CD4174AFA0AC6E6B23A1
:orphan:

.. raw:: html

    <!--
    FIXME: do not limit page width until content uses another representation
    format other than tables
    -->
    <style>.wy-nav-content { max-width: none; !important }</style>

.. dtcompatible:: nordic,npm1300-led
.. _dtbinding_nordic_npm1300_led:

nordic,npm1300-led
##################

Vendor: :ref:`Nordic Semiconductor <dt_vendor_nordic>`

Description
***********



.. code-block:: none

   Nordic nPM1300 LED controller

   The nPM1300 has three LED outputs.
   Each LED can automatically display error or charging status,
   or be controlled by software.

Properties
**********

.. tabs::

   .. group-tab:: Node specific properties

      Properties not inherited from the base binding file.

      .. list-table::
         :widths: 1 1 4
         :header-rows: 1

         * - Name
           - Type
           - Details

         * - ``nordic,led0-mode``
           - ``string``
           - .. code-block:: none

                LED 0 mode


             This property is **required**.

             Legal values: ``'error'``, ``'charging'``, ``'host'``

         * - ``nordic,led1-mode``
           - ``string``
           - .. code-block:: none

                LED 1 mode


             This property is **required**.

             Legal values: ``'error'``, ``'charging'``, ``'host'``

         * - ``nordic,led2-mode``
           - ``string``
           - .. code-block:: none

                LED 2 mode


             This property is **required**.

             Legal values: ``'error'``, ``'charging'``, ``'host'``



   .. group-tab:: Deprecated node specific properties

      Deprecated properties not inherited from the base binding file.

      (None)

   .. group-tab:: Base properties

      Properties inherited from the base binding file, which defines
      common properties that may be set on many nodes. Not all of these
      may apply to the "nordic,npm1300-led" compatible.

      (None)


Part 3

한국어 전문 번역

nordic,npm1300-led

Vendor: Nordic Semiconductor

공식 설명

Nordic nPM1300 LED controller

The nPM1300 has three LED outputs.
Each LED can automatically display error or charging status,
or be controlled by software.

PMIC 상태를 표시하는 세 LED 출력

nPM1300에는 LED output이 세 개 있습니다. 각 output은 error 상태, charging 상태를 hardware가 자동 표시하거나 host mode에서 software가 제어할 수 있습니다.

nordic,led0-mode, nordic,led1-mode, nordic,led2-mode는 모두 필수이며 각각 error·charging·host만 허용합니다. 세 LED가 서로 다른 mode를 가져도 됩니다.

공식 page에는 base property table이 없어 compatible, reg, brightness, polarity와 blink timing을 번역 표에 새로 만들지 않았습니다. 실제 parent PMIC 연결은 이 LED child page의 범위 밖입니다.

속성 전체 번역

공식 node-specific property 3개를 모두 번역했습니다. 이 page에는 base property 표가 없습니다.

노드 전용 속성 · 3개
이름형식설명과 제약
nordic,led0-modestringLED 0의 동작 mode이며 error, charging, host 중 하나입니다.
필수 · 허용값: 'error', 'charging', 'host'
nordic,led1-modestringLED 1의 동작 mode이며 error, charging, host 중 하나입니다.
필수 · 허용값: 'error', 'charging', 'host'
nordic,led2-modestringLED 2의 동작 mode이며 error, charging, host 중 하나입니다.
필수 · 허용값: 'error', 'charging', 'host'

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.