build/dts/api/bindings/gpio/adi,adp5585-gpio.html · build/dts/api/bindings/gpio/adi,adp5585-gpio.rst 공식 원문 ↗

Zephyr 3.7.0 · Devicetree · GPIO · Analog Devices, Inc.

ADI ADP5585 GPIO Controller 바인딩

ADP5585 10 GPIOs·reserved hole·two-cell specifier를 정의하는 11개 property schema입니다.

Official pathbuild/dts/api/bindings/gpio/adi,adp5585-gpio.html
Source filebuild/dts/api/bindings/gpio/adi,adp5585-gpio.rst
Source versionZephyr 3.7.0
TranslationFull · reviewed

본문 기준: Zephyr 3.7.0 LTS3 · 이후 유지보수 패치는 별도입니다.

Part 1

요약·해설

공식 원문 196줄과 property 11행을 전수 대조해 R0~R4/C0~C4 mapping·slots 5~7 hole·hog precedence 제약을 보존했습니다.

Compatible

adi,adp5585-gpio

Vendor

Analog Devices, Inc.

Properties

11 rows

Interface

13-slot expander + hog child

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기
원문 SHA-256 E2E7FA1508422D6BF50965680D516DCB05F61F1A64D287E8D8DCF080A04EF4EA
:orphan:

.. raw:: html

    <!--
    FIXME: do not limit page width until content uses another representation
    format other than tables
    -->
    <style>.wy-nav-content { max-width: none; !important }</style>

.. dtcompatible:: adi,adp5585-gpio
.. _dtbinding_adi_adp5585_gpio:

adi,adp5585-gpio
################

Vendor: :ref:`Analog Devices, Inc. <dt_vendor_adi>`

Description
***********



.. code-block:: none

   ADP5585 GPIO Controller

Properties
**********

Top level properties
====================


These property descriptions apply to "adi,adp5585-gpio"
nodes themselves. This page also describes child node
properties in the following sections.

.. tabs::

   .. group-tab:: Node specific properties

      Properties not inherited from the base binding file.

      .. list-table::
         :widths: 1 1 4
         :header-rows: 1

         * - Name
           - Type
           - Details

         * - ``gpio-controller``
           - ``boolean``
           - .. code-block:: none

                Convey's this node is a GPIO controller


             This property is **required**.

         * - ``#gpio-cells``
           - ``int``
           - .. code-block:: none

                Number of items to expect in a GPIO specifier


             This property is **required**.

             Constant value: ``2``

         * - ``ngpios``
           - ``int``
           - .. code-block:: none

                Number of GPIOs available on port expander.



             Default value: ``32``

             Constant value: ``13``

         * - ``gpio-reserved-ranges``
           - ``array``
           - .. code-block:: none

                Ranges of GPIOs reserved unavailable on port expander.
                The ADP5585 has 10 GPIO lines divided in 2 groups. GPIO number
                5, 6, 7 is reserved. That's to say, GPIO R0~R4 occupy line
                number 0~4, GPIO C0~C4 occupy line number 8~12.



             This property is **required**.

             Constant value: ``[5, 3]``

         * - ``gpio-line-names``
           - ``string-array``
           - .. code-block:: none

                This is an array of strings defining the names of the GPIO lines
                going out of the GPIO controller





   .. group-tab:: Deprecated node specific properties

      Deprecated properties not inherited from the base binding file.

      (None)

   .. group-tab:: Base properties

      Properties inherited from the base binding file, which defines
      common properties that may be set on many nodes. Not all of these
      may apply to the "adi,adp5585-gpio" compatible.

      (None)


Child node properties
=====================

.. list-table::
   :widths: 1 1 4
   :header-rows: 1

   * - Name
     - Type
     - Details

   * - ``gpio-hog``
     - ``boolean``
     - .. code-block:: none

          Conveys this node is a GPIO hog.



       This property is **required**.

   * - ``gpios``
     - ``array``
     - .. code-block:: none

          This is an array of GPIO specifiers (e.g. pin, flags) to be hogged. The number of array
          entries must be an integer multiple of the number of GPIO specifier cells for the parent
          GPIO controller.



       This property is **required**.

   * - ``input``
     - ``boolean``
     - .. code-block:: none

          If this property is set, the GPIO is configured as an input. This property takes
          precedence over the output-low and output-high properties.



   * - ``output-low``
     - ``boolean``
     - .. code-block:: none

          If this property is set, the GPIO is configured as an output set to logical low. This
          property takes precedence over the output-high property.



   * - ``output-high``
     - ``boolean``
     - .. code-block:: none

          If this property is set, the GPIO is configured as an output set to logical high.



   * - ``line-name``
     - ``string``
     - .. code-block:: none

          Optional GPIO line name.



Specifier cell names
********************

- gpio cells: pin, flags

Part 3

한국어 전문 번역

adi,adp5585-gpio

Vendor: Analog Devices, Inc.

공식 설명

ADP5585 GPIO Controller

ADP5585 GPIO controller

gpio-controller, 2-cell #gpio-cells, gpio-reserved-ranges = [5, 3]가 필수입니다. R0~R4는 line 0~4, C0~C4는 line 8~12를 사용해 실제 GPIO 10개 사이의 5~7 hole을 보존합니다.

공식 표는 ngpios에 기본값 32와 constant 13을 동시에 표시합니다. 생성된 표에 둘 다 남기고, usable line 10개와 slot span 13을 구분했으며 자동으로 하나를 삭제하지 않았습니다.

GPIO hog child

각 child는 gpio-hog와 gpios가 필수입니다. Direction 우선순위는 input > output-low > output-high이며 line-name은 선택입니다. 지정자 셀 이름은 pin, flags입니다.

속성 전체 번역

공식 top-level property 5개와 child property 6개를 모두 번역했습니다. ngpios의 default/constant 동시 표기와 reserved range를 보존했습니다.

노드 전용 속성 · 5개
이름형식설명과 제약
gpio-controllerboolean이 노드가 GPIO 컨트롤러임을 나타냅니다.
필수
#gpio-cellsintGPIO specifier 하나에 포함될 cell 수입니다.
필수 · 고정값: 2
ngpiosint컨트롤러가 제공하는 GPIO 번호 범위의 크기입니다. 중간에 빠진 번호가 있어도 마지막 번호에 1을 더한 값을 사용합니다.
고정값: 13 · 기본값: 32
gpio-reserved-rangesarrayngpios 범위에서 사용할 수 없는 구간을 지정합니다. 각 구간은 시작 오프셋과 GPIO 개수의 쌍으로 나타냅니다.
필수 · 고정값: [5, 3]
gpio-line-namesstring-arrayGPIO 컨트롤러의 각 신호선에 붙인 이름 배열입니다.
하위 노드 속성 · 6개

각 하위 노드에 적용되는 속성입니다.

이름형식설명과 제약
gpio-hogboolean부팅할 때 자동으로 확보할 GPIO를 하위 노드에 지정합니다(GPIO hog).
필수
gpiosarray자동으로 확보할 GPIO를 지정하는 배열입니다. 셀 수는 상위 노드에서 정한 GPIO 셀 수의 정수배여야 합니다.
필수
inputboolean자동 확보한 GPIO를 입력으로 설정합니다. output-low와 output-high보다 우선합니다.
output-lowboolean자동 확보한 GPIO를 논리 Low 출력으로 설정합니다. output-high보다 우선합니다.
output-highboolean자동 확보한 GPIO를 논리 High 출력으로 설정합니다.
line-namestringGPIO hog line의 선택 이름입니다.

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.