boards/sifive/hifive_unmatched/doc/index.html · boards/sifive/hifive_unmatched/doc/index.rst 공식 원문 ↗

Zephyr 3.7.0 · Boards · RISC-V · FU740

SiFive HiFive Unmatched

FU740-C000 multi-core 64-bit RISC-V board를 USB-JTAG로 개발합니다.

Official pathboards/sifive/hifive_unmatched/doc/index.html
Source fileboards/sifive/hifive_unmatched/doc/index.rst
Source versionZephyr 3.7.0
TranslationFull · reviewed

본문 기준: Zephyr 3.7.0 LTS3 · 이후 유지보수 패치는 별도입니다.

Part 1

요약·해설

Unmatched 전용 board target과 OpenOCD config를 보존합니다.

SoC

FU740-C000

ISA

64-bit RISC-V

Flash ROM

Not supported

Debug

OpenOCD

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기
원문 SHA-256 67FF2C16FE8A6A1D75A90913615046E1E8CDC48F95F64A3D66AFD6819259E90F 
.. _hifive_unmatched:

SiFive HiFive Unmatched
#######################

Overview
********

The HiFive Unmatched is a development board with a SiFive FU740-C000
multi-core 64bit RISC-V SoC.

.. image:: ../../../../../../../boards/sifive/hifive_unmatched/doc/img/hifive_unmatched.jpg
   :align: center
   :alt: SiFive HiFive Unmatched board

Programming and debugging
*************************

Building
========

Applications for the ``hifive_unmatched`` board configuration can be built as
usual (see :ref:`build_an_application`) using the corresponding board name:

.. zephyr-app-commands::
   :board: hifive_unmatched
   :goals: build

Flashing
========

Current version has not yet supported flashing binary to onboard Flash ROM.

This board has USB-JTAG interface and this can be used with OpenOCD.
Load applications on DDR and run as follows:

.. code-block:: console

   openocd -c 'bindto 0.0.0.0' \
           -f boards/riscv/hifive_unmatched/support/openocd_hifive_unmatched.cfg
   riscv64-zephyr-elf-gdb build/zephyr/zephyr.elf
   (gdb) target remote :3333
   (gdb) c

Debugging
=========

Refer to the detailed overview about :ref:`application_debugging`.

Part 3

한국어 전문 번역

개요

SiFive HiFive Unmatched는 SiFive FU740-C000 multi-core 64-bit RISC-V SoC 기반 development board입니다.

SiFive HiFive Unmatched board
SiFive HiFive Unmatched board

Programming and debugging

Build

hifive_unmatched board configuration으로 일반적인 방식으로 build합니다.

west build -b hifive_unmatched <application>

Flashing

현재 version은 binary를 onboard Flash ROM에 기록하는 기능을 아직 지원하지 않습니다. USB-JTAG interface와 OpenOCD로 application을 DDR에 load해 실행합니다.

openocd -c 'bindto 0.0.0.0'   -f boards/riscv/hifive_unmatched/support/openocd_hifive_unmatched.cfg
riscv64-zephyr-elf-gdb build/zephyr/zephyr.elf
(gdb) target remote :3333
(gdb) c

Debugging

상세 절차는 Zephyr application debugging 문서를 참고합니다.

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.