Part 1
요약·해설
Reset/DC/SPI pin 6개와 TL019FQV01, Waveshare 240×240 1.3-inch IPS LCD 지원을 정리합니다.
Controller
ST7789V
Displays
2
Waveshare
240×240
Bus
SPI
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
원문 SHA-256
44509B420E25DA40C0CB9CD6E09C7050CE4BD1393E402BFBD2B05EF50DA27B1F
.. _st7789v_generic:
Generic ST7789V Display Shield
##############################
Overview
********
This is a generic shield for display shields based on ST7789V display
controller. More information about the controller can be found in
`ST7789V Datasheet`_.
Pins Assignment of the Generic ST7789V Display Shield
=====================================================
+-----------------------+--------------------------------------------+
| Arduino Connector Pin | Function |
+=======================+===============+============================+
| D8 | ST7789V Reset | |
+-----------------------+---------------+----------------------------+
| D9 | ST7789V DC | (Data/Command) |
+-----------------------+---------------+----------------------------+
| D10 | SPI SS | (Serial Slave Select) |
+-----------------------+---------------+----------------------------+
| D11 | SPI MOSI | (Serial Data Input) |
+-----------------------+---------------+----------------------------+
| D12 | SPI MISO | (Serial Data Out) |
+-----------------------+---------------+----------------------------+
| D13 | SPI SCK | (Serial Clock Input) |
+-----------------------+---------------+----------------------------+
Current supported displays
==========================
+----------------------+------------------------------+
| Display | Shield Designation |
| | |
+======================+==============================+
| TL019FQV01 | st7789v_tl019fqv01 |
| | |
+----------------------+------------------------------+
| Waveshare 240x240 | st7789v_waveshare_240x240 |
| 1.3inch IPS LCD | |
+----------------------+------------------------------+
Requirements
************
This shield can only be used with a board that provides a configuration
for Arduino connectors and defines node aliases for SPI and GPIO interfaces
(see :ref:`shields` for more details).
Programming
***********
Set ``--shield st7789v_tl019fqv01`` when you invoke ``west build``. For example:
.. zephyr-app-commands::
:zephyr-app: samples/subsys/display/lvgl
:board: nrf52840dk/nrf52840
:shield: st7789v_tl019fqv01
:goals: build
References
**********
.. target-notes::
.. _ST7789V Datasheet:
https://www.newhavendisplay.com/appnotes/datasheets/LCDs/ST7789V.pdf
Part 3
한국어 전문 번역
개요
ST7789V display controller 기반 display shield를 위한 generic shield입니다. Controller에 관한 자세한 내용은 ST7789V Datasheet에서 확인할 수 있습니다.
Generic ST7789V display shield 핀 배치
| Arduino connector pin | Function | Description |
|---|---|---|
| D8 | ST7789V Reset | |
| D9 | ST7789V DC | Data/Command |
| D10 | SPI SS | Serial Slave Select |
| D11 | SPI MOSI | Serial Data Input |
| D12 | SPI MISO | Serial Data Out |
| D13 | SPI SCK | Serial Clock Input |
현재 지원하는 display
| Display | Shield designation |
|---|---|
| TL019FQV01 | st7789v_tl019fqv01 |
| Waveshare 240×240 1.3-inch IPS LCD | st7789v_waveshare_240x240 |
요구 사항
이 shield는 Arduino connector 구성을 제공하고 SPI 및 GPIO interface용 node alias를 정의한 board에서만 사용할 수 있습니다.
프로그래밍
west build를 호출할 때 --shield st7789v_tl019fqv01를 지정합니다. 예:
west build -b nrf52840dk/nrf52840 --shield st7789v_tl019fqv01 samples/subsys/display/lvgl
참고 자료
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.