boards/shields/rk043fn02h_ct/doc/index.html · boards/shields/rk043fn02h_ct/doc/index.rst 공식 원문 ↗

Zephyr 3.7.0 · Shields · Display · Parallel FPC

RK043FN02H-CT Parallel Display

4.3-inch capacitive touch TFT를 40-pin parallel FPC와 6-pin I2C로 연결합니다.

Official pathboards/shields/rk043fn02h_ct/doc/index.html
Source fileboards/shields/rk043fn02h_ct/doc/index.rst
Source versionZephyr 3.7.0
TranslationFull · reviewed

본문 기준: Zephyr 3.7.0 LTS3 · 이후 유지보수 패치는 별도입니다.

Part 1

요약·해설

Parallel RGB 신호와 touch I2C를 분리해 전 pin group을 정리하고 MIPI FPC와 호환되지 않음을 설명합니다.

Panel

4.3-inch TFT

Resolution

480×272

Display

40-pin parallel

Touch

6-pin I2C

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기
원문 SHA-256 5066FD5BD2B0E70C3A68B69CC8A27266B0C448393D93C8272CEEDEE68EC3361F
.. _rk043fn02h_ct:

RK043FN02H-CT Parallel Display
##############################

Overview
********

RK043FN02H-CT is a 4.3 inch TFT 480*272 pixels with LED backlight and
capacitive touch panel from Rocktech. This LCD panel can work with several i.MX
RT EVKs and LPC MCUs for evaluation of applications with display.

More information about the shield can be found at the `RK043FN02H-CT product
page`_.

This display uses a 40 pin parallel FPC interface plus 6 pin I2C interface,
available on many NXP EVKs. Note that this parallel FPC interface is not
compatible with the MIPI FPC interface present on other NXP EVKs.

Pins Assignment of the Rocktech RK043FN02H-CT Parallel Display
==============================================================

+-----------------------+------------------------+
| Parallel FPC Pin      | Function               |
+=======================+========================+
| 1                     | LED backlight cathode  |
+-----------------------+------------------------+
| 2                     | LED backlight anode    |
+-----------------------+------------------------+
| 3                     | GND                    |
+-----------------------+------------------------+
| 4                     | VDD (3v3)              |
+-----------------------+------------------------+
| 5-7                   | GND                    |
+-----------------------+------------------------+
| 8-12                  | LCD D11-D15            |
+-----------------------+------------------------+
| 13-14                 | GND                    |
+-----------------------+------------------------+
| 15-20                 | LCD D5-D10             |
+-----------------------+------------------------+
| 21-23                 | GND                    |
+-----------------------+------------------------+
| 24-28                 | LCD D0-D4              |
+-----------------------+------------------------+
| 29                    | GND                    |
+-----------------------+------------------------+
| 30                    | LCD CLK                |
+-----------------------+------------------------+
| 31                    | LCD DISP               |
+-----------------------+------------------------+
| 32                    | LCD HSYNC              |
+-----------------------+------------------------+
| 33                    | LCD VSYNC              |
+-----------------------+------------------------+
| 34                    | LCD DE                 |
+-----------------------+------------------------+
| 35                    | NC                     |
+-----------------------+------------------------+
| 36                    | GND                    |
+-----------------------+------------------------+
| 37-40                 | NC                     |
+-----------------------+------------------------+

+-----------------------+------------------------+
| I2C Connector Pin     | Function               |
+=======================+========================+
| 1                     | VDD (3v3)              |
+-----------------------+------------------------+
| 2                     | LCD Touch Reset        |
+-----------------------+------------------------+
| 3                     | LCD Touch Interrupt    |
+-----------------------+------------------------+
| 4                     | LCD I2C SCL            |
+-----------------------+------------------------+
| 5                     | LCD I2C SDA            |
+-----------------------+------------------------+
| 6                     | GND                    |
+-----------------------+------------------------+

Requirements
************

This shield can only be used with a board which provides a configuration
for the 40+6 pin parallel/I2C FPC interface

Programming
***********

Set ``--shield rk043fn02h_ct`` when you invoke ``west build``. For
example:

.. zephyr-app-commands::
   :zephyr-app: samples/drivers/display
   :board: mimxrt1060_evk
   :shield: rk043fn02h_ct
   :goals: build

References
**********

.. target-notes::

.. _RK043FN02H-CT product page:
   https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/4-3-lcd-panel:RK043FN02H-CT

Part 3

한국어 전문 번역

개요

RK043FN02H-CT는 Rocktech의 4.3-inch TFT 480×272 pixel display로, LED backlight와 capacitive touch panel을 갖췄습니다. 이 LCD panel은 display application 평가를 위해 여러 i.MX RT EVK 및 LPC MCU와 함께 사용할 수 있습니다.

Shield에 관한 자세한 정보는 RK043FN02H-CT product page에서 확인할 수 있습니다.

이 display는 여러 NXP EVK에서 제공하는 40-pin parallel FPC interface와 6-pin I2C interface를 사용합니다. 이 parallel FPC interface는 다른 NXP EVK에 있는 MIPI FPC interface와 호환되지 않습니다.

Rocktech RK043FN02H-CT parallel display 핀 배치

Parallel FPC

Parallel FPC pinFunction
1LED backlight cathode
2LED backlight anode
3GND
4VDD (3v3)
5-7GND
8-12LCD D11-D15
13-14GND
15-20LCD D5-D10
21-23GND
24-28LCD D0-D4
29GND
30LCD CLK
31LCD DISP
32LCD HSYNC
33LCD VSYNC
34LCD DE
35NC
36GND
37-40NC

I2C connector

I2C connector pinFunction
1VDD (3v3)
2LCD touch reset
3LCD touch interrupt
4LCD I2C SCL
5LCD I2C SDA
6GND

요구 사항

이 shield는 40+6 pin parallel/I2C FPC interface 구성을 제공하는 board에서만 사용할 수 있습니다.

프로그래밍

west build를 호출할 때 --shield rk043fn02h_ct를 지정합니다. 예:

west build -b mimxrt1060_evk   --shield rk043fn02h_ct   samples/drivers/display

참고 자료

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.