Part 1
요약·해설
44개 connector pin을 모두 보존하고, 호환 board 조건과 video capture sample build를 설명합니다.
Sensor
OV5640
Connector
44-pin BTB
Interfaces
MIPI CSI · DVP
EVK
RT1160 · RT1170
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
원문 SHA-256
CCC01A81320B771495E946125D3417B3F975FD1B8A526FADB64731458BAEC362
.. _nxp_btb44_ov5640:
NXP BTB-44 OV5640 Camera Module
###############################
Overview
********
This shield supports ov5640 camera modules which use a 44-pin board-to-board connector and
a MIPI CSI or DVP (parallel) interface. These camera modules are made specifically for and
provided together with NXP's i.MX RT1160 and RT1170 EVK boards.
More information about this OV5640 camera module can be found at `Camera iMXRT`_.
Pins assignment of the NXP board-to-board 44-pin OV5640 camera module
======================================================================
+----------------------+--------------------+
| Camera Connector Pin | Function |
+======================+====================+
| 1 | AGND |
+----------------------+--------------------+
| 2 | AF_GND |
+----------------------+--------------------+
| 3 | STROBE |
+----------------------+--------------------+
| 4 | AF_VCC |
+----------------------+--------------------+
| 5 | SDA |
+----------------------+--------------------+
| 6 | VCMSINK |
+----------------------+--------------------+
| 7 | SCL |
+----------------------+--------------------+
| 8 | AVDD |
+----------------------+--------------------+
| 9 | RESETB |
+----------------------+--------------------+
| 10 | GPIO1 |
+----------------------+--------------------+
| 11 | PCLK |
+----------------------+--------------------+
| 12 | GPIO0 |
+----------------------+--------------------+
| 13 | VSYNC |
+----------------------+--------------------+
| 14 | FREX |
+----------------------+--------------------+
| 15 | HREF |
+----------------------+--------------------+
| 16 | MIPI_CSI_DP1 / D9 |
+----------------------+--------------------+
| 17 | PWDN |
+----------------------+--------------------+
| 18 | MIPI_CSI_DN1 / D8 |
+----------------------+--------------------+
| 19 | MIPI_CSI_DP1 / D9 |
+----------------------+--------------------+
| 20 | DGND |
+----------------------+--------------------+
| 21 | MIPI_CSI_DN1 / D8 |
+----------------------+--------------------+
| 22 | MIPI_CSI_CLKP / D7 |
+----------------------+--------------------+
| 23 | MIPI_CSI_CLKP / D7 |
+----------------------+--------------------+
| 24 | MIPI_CSI_CLKN / D6 |
+----------------------+--------------------+
| 25 | MIPI_CSI_CLKN / D6 |
+----------------------+--------------------+
| 26 | DGND |
+----------------------+--------------------+
| 27 | MIPI_CSI_DP0 / D5 |
+----------------------+--------------------+
| 28 | MIPI_CSI_DP0 / D5 |
+----------------------+--------------------+
| 29 | MIPI_CSI_DN0 / D4 |
+----------------------+--------------------+
| 30 | MIPI_CSI_DN0 / D4 |
+----------------------+--------------------+
| 31 | D3 |
+----------------------+--------------------+
| 32 | DGND |
+----------------------+--------------------+
| 33 | D2 |
+----------------------+--------------------+
| 34 | XCLK |
+----------------------+--------------------+
| 35 | D1 |
+----------------------+--------------------+
| 36 | DVDD |
+----------------------+--------------------+
| 37 | D0 |
+----------------------+--------------------+
| 38 | DOVDD |
+----------------------+--------------------+
| 39 | DGND |
+----------------------+--------------------+
| 40 | DGND |
+----------------------+--------------------+
| 41 | GND |
+----------------------+--------------------+
| 42 | GND |
+----------------------+--------------------+
| 43 | GND |
+----------------------+--------------------+
| 44 | AF_GND |
+----------------------+--------------------+
Requirements
************
This shield can only be used with a board which provides a 44-pin board-to-board
connector with MIPI CSI or DVP (parallel) interface where the pinouts are defined
as above, such as i.MX RT1160 and RT1170 EVK boards.
Programming
***********
Set ``--shield nxp_btb44_ov5640`` when you invoke ``west build``. For example:
.. zephyr-app-commands::
:zephyr-app: samples/subsys/video/capture
:board: mimxrt1170_evk/mimxrt1176/cm7
:shield: nxp_btb44_ov5640
:goals: build
References
**********
.. target-notes::
.. _Camera iMXRT:
https://community.nxp.com/t5/i-MX-RT-Knowledge-Base/Connecting-camera-and-LCD-to-i-MX-RT-EVKs/ta-p/1122183
Part 3
한국어 전문 번역
개요
이 shield는 44-pin board-to-board connector와 MIPI CSI 또는 DVP(parallel) interface를 사용하는 OV5640 camera module을 지원합니다. 이 camera module은 NXP i.MX RT1160 및 i.MX RT1170 EVK board를 위해 특별히 제작되어 해당 board와 함께 제공됩니다.
OV5640 camera module에 관한 자세한 내용은 Camera iMXRT에서 확인할 수 있습니다.
NXP board-to-board 44-pin OV5640 camera module 핀 배치
| Camera connector pin | Function |
|---|---|
| 1 | AGND |
| 2 | AF_GND |
| 3 | STROBE |
| 4 | AF_VCC |
| 5 | SDA |
| 6 | VCMSINK |
| 7 | SCL |
| 8 | AVDD |
| 9 | RESETB |
| 10 | GPIO1 |
| 11 | PCLK |
| 12 | GPIO0 |
| 13 | VSYNC |
| 14 | FREX |
| 15 | HREF |
| 16 | MIPI_CSI_DP1 / D9 |
| 17 | PWDN |
| 18 | MIPI_CSI_DN1 / D8 |
| 19 | MIPI_CSI_DP1 / D9 |
| 20 | DGND |
| 21 | MIPI_CSI_DN1 / D8 |
| 22 | MIPI_CSI_CLKP / D7 |
| 23 | MIPI_CSI_CLKP / D7 |
| 24 | MIPI_CSI_CLKN / D6 |
| 25 | MIPI_CSI_CLKN / D6 |
| 26 | DGND |
| 27 | MIPI_CSI_DP0 / D5 |
| 28 | MIPI_CSI_DP0 / D5 |
| 29 | MIPI_CSI_DN0 / D4 |
| 30 | MIPI_CSI_DN0 / D4 |
| 31 | D3 |
| 32 | DGND |
| 33 | D2 |
| 34 | XCLK |
| 35 | D1 |
| 36 | DVDD |
| 37 | D0 |
| 38 | DOVDD |
| 39 | DGND |
| 40 | DGND |
| 41 | GND |
| 42 | GND |
| 43 | GND |
| 44 | AF_GND |
요구 사항
이 shield는 위와 같은 pinout이 정의된 MIPI CSI 또는 DVP(parallel) interface용 44-pin board-to-board connector를 제공하는 board에서만 사용할 수 있습니다. i.MX RT1160 및 i.MX RT1170 EVK board가 그 예입니다.
프로그래밍
west build를 호출할 때 --shield nxp_btb44_ov5640을 지정합니다. 예:
west build -b mimxrt1170_evk/mimxrt1176/cm7 --shield nxp_btb44_ov5640 samples/subsys/video/capture참고 자료
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.