Part 1
요약·해설
ACE 1.5 board configuration과 Xtensa HiFi4 toolchain 변수를 설명합니다.
Intel ACE 1.5
Meteor Lake
ace10_LX7HiFi4
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
8505DA8075042FDB1F40782A210C4E1A5882B37C40DBF580E7786EFF34A4FF40
.. _intel_adsp_ace15:
Intel ADSP ACE 1.5
##################
Overview
********
This board configuration is used to run Zephyr on the Intel ACE 1.5 Audio DSP.
This configuration is present, for example, on Intel Meteor Lake microprocessors.
Refer to :ref:`intel_adsp_generic` for more details on Intel ADSP ACE and CAVS.
System requirements
*******************
Xtensa Toolchain
----------------
If you choose to build with the Xtensa toolchain instead of the Zephyr SDK, set
the following environment variables specific to the board in addition to the
Xtensa toolchain environment variables listed in :ref:`intel_adsp_generic`.
.. code-block:: shell
export ZEPHYR_TOOLCHAIN_VARIANT=xt-clang
export TOOLCHAIN_VER=RI-2021.7-linux
export XTENSA_CORE=ace10_LX7HiFi4
For older versions of the toolchain, set the toolchain variant to ``xcc``.
Programming and Debugging
*************************
Refer to :ref:`intel_adsp_generic` for generic instructions on programming and
debugging applicable to all CAVS and ACE platforms.
Part 3
한국어 전문 번역
개요
이 board configuration은 Intel ACE 1.5 Audio DSP에서 Zephyr를 실행하는 데 사용합니다. 예를 들어 Intel Meteor Lake microprocessor에 이 configuration이 있습니다. Intel ADSP ACE와 CAVS의 자세한 공통 설명은 intel_adsp_generic 문서를 참고합니다.
System requirement
Xtensa toolchain
Zephyr SDK 대신 Xtensa toolchain으로 build한다면 Intel ADSP 공통 문서에 나열된 Xtensa environment variable과 함께 다음 board-specific variable을 설정합니다.
export ZEPHYR_TOOLCHAIN_VARIANT=xt-clang
export TOOLCHAIN_VER=RI-2021.7-linux
export XTENSA_CORE=ace10_LX7HiFi4더 오래된 toolchain version에서는 toolchain variant를 xcc로 설정합니다.
Programming과 Debugging
모든 CAVS·ACE platform에 적용되는 programming과 debugging 공통 절차는 intel_adsp_generic 문서를 참고합니다.
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.