boards/infineon/xmc45_relax_kit/doc/index.html · boards/infineon/xmc45_relax_kit/doc/index.rst 공식 원문 ↗

Zephyr 3.7.0 · Boards · Infineon XMC

Infineon XMC45 Relax Kit

120MHz XMC4500과 분리형 J-Link debugger를 갖춘 evaluation board입니다.

Official pathboards/infineon/xmc45_relax_kit/doc/index.html
Source fileboards/infineon/xmc45_relax_kit/doc/index.rst
Source versionZephyr 3.7.0
TranslationFull · reviewed

본문 기준: Zephyr 3.7.0 LTS3 · 이후 유지보수 패치는 별도입니다.

Part 1

요약·해설

XMC45 Relax Kit는 XMC4500, Quad-SPI Flash와 풍부한 serial·analog interface를 제공합니다.

XMC45 Relax Kit
XMC45 Relax Kit.
MCU

XMC4500 · Cortex-M4F

Clock

12MHz crystal · 120MHz CPU

Debug

Detachable Segger J-Link

Part 2

접을 수 있는 영어 원문 전체

영어 원문 전체 펼치기
원문 SHA-256 4775B939A8D10EF81ED44DE58CF0E5721691337A28ED5615908FAE6F9E2C70E7
.. _xmc45_relax_kit:

INFINEON XMC45-RELAX-KIT
########################

Overview
********

The XMC4500 Relax Kit is designed to evaluate the capabilities of the XMC4500
Microcontroller. It is based on High performance ARM Cortex-M4F which can run
up to 120MHz.

.. image:: ../../../../../../../boards/infineon/xmc45_relax_kit/doc/xmc45_relax_kit.jpg
   :align: center
   :alt: XMC45-RELAX-KIT

Features:
=========

* ARM Cortex-M4F XMC4500
* 32 Mbit Quad-SPI Flash
* 4 x SPI-Master, 3x I2C, 3 x I2S, 3 x UART, 2 x CAN, 17 x ADC
* 2 pin header x1 and x2 with 80 pins
* Two buttons and two LEDs for user interaction
* Detachable on-board debugger (second XMC4500) with Segger J-Link

Details on the Relax Kit development board can be found in the `Relax Kit User Manual`_.

Supported Features
==================

* The on-board 12-MHz crystal allows the device to run at its maximum operating speed of 120MHz.

The Relax Kit development board configuration supports the following hardware features:

+-----------+------------+-----------------------+
| Interface | Controller | Driver/Component      |
+===========+============+=======================+
| NVIC      | on-chip    | nested vectored       |
|           |            | interrupt controller  |
+-----------+------------+-----------------------+
| SYSTICK   | on-chip    | system clock          |
+-----------+------------+-----------------------+
| UART      | on-chip    | serial port           |
+-----------+------------+-----------------------+
| SPI       | on-chip    | spi                   |
+-----------+------------+-----------------------+
| GPIO      | on-chip    | gpio                  |
+-----------+------------+-----------------------+
| FLASH     | on-chip    | flash                 |
+-----------+------------+-----------------------+
| ADC       | on-chip    | adc                   |
+-----------+------------+-----------------------+
| DMA       | on-chip    | dma                   |
+-----------+------------+-----------------------+
| PWM       | on-chip    | pwm                   |
+-----------+------------+-----------------------+
| WATCHDOG  | on-chip    | watchdog              |
+-----------+------------+-----------------------+
| MDIO      | on-chip    | mdio                  |
+-----------+------------+-----------------------+
| ETHERNET  | on-chip    | ethernet              |
+-----------+------------+-----------------------+
| PTP       | on-chip    | ethernet              |
+-----------+------------+-----------------------+

More details about the supported peripherals are available in `XMC4500 TRM`_
Other hardware features are not currently supported by the Zephyr kernel.

Building and Flashing
*********************
Flashing
========

Here is an example for the :ref:`hello_world` application.

.. zephyr-app-commands::
   :zephyr-app: samples/hello_world
   :board: xmc45_relax_kit
   :goals: flash

Debugging
=========

Here is an example for the :ref:`hello_world` application.

.. zephyr-app-commands::
   :zephyr-app: samples/hello_world
   :board: xmc45_relax_kit
   :goals: debug

Step through the application in your debugger.

References
**********

.. _Relax Kit User Manual:
   https://www.infineon.com/dgdl/Board_Users_Manual_XMC4500_Relax_Kit-V1_R1.2_released.pdf?fileId=db3a30433acf32c9013adf6b97b112f9

.. _XMC4500 TRM:
   https://www.infineon.com/dgdl/Infineon-xmc4500_rm_v1.6_2016-UM-v01_06-EN.pdf?fileId=db3a30433580b3710135a5f8b7bc6d13

Part 3

한국어 전문 번역

개요

XMC4500 Relax Kit는 XMC4500 microcontroller의 기능을 평가하도록 설계되었습니다. 최대 120MHz로 동작하는 high-performance Arm Cortex-M4F를 기반으로 합니다.

XMC45-RELAX-KIT
Infineon XMC45-RELAX-KIT.

기능

  • Arm Cortex-M4F XMC4500
  • 32Mbit Quad-SPI Flash
  • SPI master 4개, I2C 3개, I2S 3개, UART 3개, CAN 2개, ADC 17개
  • 80개 pin을 제공하는 x1·x2 pin header 2개
  • 사용자 입력·표시용 button 2개와 LED 2개
  • Segger J-Link를 지원하는 분리 가능한 onboard debugger(두 번째 XMC4500)

Relax Kit development board의 자세한 내용은 아래 Relax Kit User Manual에서 확인할 수 있습니다.

지원 기능

Onboard 12MHz crystal을 사용하면 device를 최대 operating speed인 120MHz로 실행할 수 있습니다. Relax Kit board configuration이 지원하는 hardware 기능은 다음과 같습니다.

InterfaceControllerDriver/Component
NVICon-chipnested vectored interrupt controller
SYSTICKon-chipsystem clock
UARTon-chipserial port
SPIon-chipspi
GPIOon-chipgpio
FLASHon-chipflash
ADCon-chipadc
DMAon-chipdma
PWMon-chippwm
WATCHDOGon-chipwatchdog
MDIOon-chipmdio
ETHERNETon-chipethernet
PTPon-chipethernet

지원 peripheral의 자세한 내용은 XMC4500 TRM에 있습니다. 그 밖의 hardware 기능은 현재 Zephyr kernel이 지원하지 않습니다.

Build와 Flash

Flashing

다음은 hello_world application을 XMC45 Relax Kit용으로 build하고 flash하는 예입니다.

west build -b xmc45_relax_kit samples/hello_world
west flash

Debugging

같은 hello_world application을 debug하려면 다음 명령을 사용합니다.

west build -b xmc45_relax_kit samples/hello_world
west debug

Debugger에서 application을 한 단계씩 실행할 수 있습니다.

참고 자료

Source

출처

영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.