Part 1
요약·해설
bcm958402m2/bcm58402/a72는 PCIe Gen4 card이며 on-board flash 대신 PCIe interface로 boot합니다. optional RS232 UART와 JTAG pad를 제공합니다.
Viper BCM58402_A72 / Cortex-A72
Generation 4
Optional JTAG · UART console
Part 2
접을 수 있는 영어 원문 전체
영어 원문 전체 펼치기
52661B3077F2BAB16513B0863B702EDD54D40AF673A2D40B99F2FC80789A1839
.. _bcm958402m2_a72:
Broadcom BCM958402M2 (Cortex-A72)
#################################
Overview
********
The Broadcom ``bcm958402m2/bcm58402/a72`` board utilizes the Viper BCM58402_A72 SoC
to provide support for PCIe offload engine functionality.
Hardware
********
The ``bcm958402m2/bcm58402/a72`` is a PCIe card with the following physical features:
* PCIe Gen4 interface
* RS232 UART (optionally populated)
* JTAG (optionally populated)
Supported Features
==================
The Broadcom ``bcm958402m2/bcm58402/a72`` board configuration supports the following
hardware features:
+-----------+------------+--------------------------------------+
| Interface | Controller | Driver/Component |
+===========+============+======================================+
| GIC-500 | on-chip | GICv3 interrupt controller |
+-----------+------------+--------------------------------------+
| UART | on-chip | NS16550 compatible serial port |
+-----------+------------+--------------------------------------+
Other hardware features have not been enabled yet for this board.
The default configuration can be found in
:zephyr_file:`boards/brcm/bcm958402m2/bcm958402m2_bcm58402_a72_defconfig`
Programming and Debugging
*************************
Flashing
========
The flash on board is not supported by Zephyr at this time.
Board is booted over PCIe interface.
Debugging
=========
The ``bcm958402m2/bcm58402/a72`` board includes pads for soldering a JTAG connector.
Zephyr applications running on the Cortex-A72 core can also be tested
by observing UART console output.
Part 3
한국어 전문 번역
개요
Broadcom bcm958402m2/bcm58402/a72 board는 Viper BCM58402_A72 SoC를 사용해 PCIe offload engine 기능을 제공합니다.
하드웨어
다음 physical feature를 갖춘 PCIe card입니다.
- PCIe Gen4 interface
- 선택적으로 실장되는 RS232 UART
- 선택적으로 실장되는 JTAG
지원 기능
| Interface | Controller | Driver/Component |
|---|---|---|
| GIC-500 | on-chip | GICv3 interrupt controller |
| UART | on-chip | NS16550 compatible serial port |
다른 hardware 기능은 아직 이 board에서 활성화되지 않았습니다. 기본 구성은 boards/brcm/bcm958402m2/bcm958402m2_bcm58402_a72_defconfig입니다.
프로그래밍과 디버깅
Flashing
on-board flash는 현재 Zephyr에서 지원하지 않습니다. board는 PCIe interface를 통해 boot합니다.
Debugging
JTAG connector를 solder할 수 있는 pad가 있습니다. Cortex-A72 core에서 실행하는 Zephyr application은 UART console output을 관찰해 시험할 수도 있습니다.
Source
출처
영어 원문에는 문단, 문서 지시문, 표, 코드, 코드 심벌, 경로를 그대로 보존했습니다.