요약·해설, 영어 원문, 전체 번역을 구분해 실었습니다. API 이름, 코드 심벌, 소스 경로는 원문 표기를 유지합니다.
1. 요약·해설
원문의 핵심 내용을 정리하고 커널 프로그래밍에 필요한 설명을 덧붙였습니다. 아래의 전체 번역과는 별도로 작성한 해설입니다.
2. 영어 원문 전체
번역에 사용한 Linux v6.18.37 원문입니다. 줄 번호는 해당 버전의 소스 파일을 기준으로 합니다.
원문 전체 펼치기
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/watchdog/fsl,scu-wdt.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: i.MX SCU Client Device Node - Watchdog Based on SCU Message Protocol
maintainers:
- Dong Aisheng <[email protected]>
description: i.MX SCU Client Device Node
Client nodes are maintained as children of the relevant IMX-SCU device node.
allOf:
- $ref: watchdog.yaml#
properties:
compatible:
items:
- enum:
- fsl,imx8dxl-sc-wdt
- fsl,imx8qm-sc-wdt
- fsl,imx8qxp-sc-wdt
- const: fsl,imx-sc-wdt
required:
- compatible
unevaluatedProperties: false
examples:
- |
watchdog {
compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
timeout-sec = <60>;
};
3. 한국어 전문 번역
영어 원문의 문단 순서와 의미에 맞춰 전체 내용을 번역했습니다. 코드, 함수명, 코드 심벌, URL은 원문 표기를 유지합니다.
i.MX SCU message protocol 워치독
1-14GPL-2.0-only 또는 BSD-2-Clause로 배포되는 이 스키마는 SCU message protocol 기반 i.MX 워치독 client device node를 정의합니다. client node는 관련 IMX-SCU device node의 child로 유지합니다. 관리자는 Dong Aisheng입니다.
i.MX8 SCU 호환성과 공통 fallback
15-31공통 `watchdog.yaml`을 상속합니다. `compatible`은 `fsl,imx8dxl-sc-wdt`, `fsl,imx8qm-sc-wdt`, `fsl,imx8qxp-sc-wdt` 중 SoC별 문자열 뒤에 공통 `fsl,imx-sc-wdt` fallback을 둡니다.
`compatible`만 필수이며 평가되지 않은 추가 속성은 허용하지 않습니다.
allOf:
- $ref: watchdog.yaml#
properties:
compatible:
items:
- enum:
- fsl,imx8dxl-sc-wdt
- fsl,imx8qm-sc-wdt
- fsl,imx8qxp-sc-wdt
- const: fsl,imx-sc-wdt
required:
- compatible
unevaluatedProperties: false
i.MX8QXP SCU 워치독 예제
32-37예제 child node는 i.MX8QXP SCU 호환 문자열과 공통 fallback을 사용하고 timeout을 60초로 설정합니다.
examples:
- |
watchdog {
compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
timeout-sec = <60>;
};
요약과 해설
fsl,scu-wdt.yaml:1-37IMX-SCU child 워치독 노드와 i.MX8 SoC별 호환 문자열을 설명합니다. 접을 수 있는 영어 원문 전체와 한국어 전문 번역을 함께 제공하며, compatible, register, clock, interrupt, reset, 예제와 원문 줄 좌표를 원형대로 보존합니다.