← Documents Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml GitHub 원문 ↗

Linux 6.18.37 · Devicetree Bindings / USB

Richtek RT1711H Type-C PD Controller

RT1711H·RT1715의 PD 세대, VBUS와 HS·SS·DP graph를 설명합니다.

Source pathDocumentation/devicetree/bindings/usb/richtek,rt1711h.yaml
Source versionLinux v6.18.37
TranslationDUJINLABS 전문 번역 + 해설

요약·해설과 원문, 전문 번역을 서로 분리했습니다. API 이름, symbol, source path는 원문 표기를 사용합니다.

1. 요약·해설

원문의 핵심 논리와 kernel programming 관점의 보충 설명입니다. 아래의 전문 번역과는 별도로 작성했습니다.

요약과 해설

richtek,rt1711h.yaml:1-103

RT1711H·RT1715의 PD 세대, VBUS와 HS·SS·DP graph를 설명합니다. 접을 수 있는 영어 원문 전체와 한국어 전문 번역을 함께 제공하며, compatible, register, interrupt, clock, DMA, PDO, graph endpoint, source path와 원문 줄 좌표를 원형대로 보존합니다.

2. 영어 원문 전체

번역 기준이 된 Linux v6.18.37 원문입니다. 줄 번호는 이 버전의 파일 좌표입니다.

원문 전체 펼치기
1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2 %YAML 1.2
3 ---
4 $id: http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
6
7 title: Richtek RT1711H Type-C Port Switch and Power Delivery controller
8
9 maintainers:
10 - Gene Chen <[email protected]>
11
12 description: |
13 The RT1711H is a USB Type-C controller that complies with the latest
14 USB Type-C and PD standards. It does the USB Type-C detection including attach
15 and orientation. It integrates the physical layer of the USB BMC power
16 delivery protocol to allow up to 100W of power. The BMC PD block enables full
17 support for alternative interfaces of the Type-C specification.
18
19 properties:
20 compatible:
21 enum:
22 - richtek,rt1711h
23 - richtek,rt1715
24 description:
25 RT1711H support PD20, RT1715 support PD30 except Fast Role Swap.
26
27 reg:
28 maxItems: 1
29
30 interrupts:
31 maxItems: 1
32
33 vbus-supply:
34 description: VBUS power supply
35
36 wakeup-source:
37 type: boolean
38
39 connector:
40 type: object
41 $ref: /schemas/connector/usb-connector.yaml#
42 description:
43 Properties for usb c connector.
44
45 additionalProperties: false
46
47 required:
48 - compatible
49 - reg
50 - connector
51 - interrupts
52
53 examples:
54 - |
55 #include <dt-bindings/interrupt-controller/irq.h>
56 #include <dt-bindings/usb/pd.h>
57 i2c {
58 #address-cells = <1>;
59 #size-cells = <0>;
60
61 rt1711h@4e {
62 compatible = "richtek,rt1711h";
63 reg = <0x4e>;
64 interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
65 wakeup-source;
66
67 connector {
68 compatible = "usb-c-connector";
69 label = "USB-C";
70 data-role = "dual";
71 power-role = "dual";
72 try-power-role = "sink";
73 source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
74 sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
75 op-sink-microwatt = <10000000>;
76
77 ports {
78 #address-cells = <1>;
79 #size-cells = <0>;
80
81 port@0 {
82 reg = <0>;
83 endpoint {
84 remote-endpoint = <&usb_hs>;
85 };
86 };
87 port@1 {
88 reg = <1>;
89 endpoint {
90 remote-endpoint = <&usb_ss>;
91 };
92 };
93 port@2 {
94 reg = <2>;
95 endpoint {
96 remote-endpoint = <&dp_aux>;
97 };
98 };
99 };
100 };
101 };
102 };
103 ...
104

3. 한국어 전문 번역

영어 원문의 문단 순서와 의미를 유지한 전체 번역입니다. 코드, 함수명, symbol과 URL은 원문 표기를 유지합니다.

RT1711H·RT1715 Type-C PD controller

1-18

GPL-2.0-only 또는 BSD-2-Clause로 배포되는 이 스키마는 Richtek RT1711H Type-C Port Switch 및 Power Delivery controller를 정의합니다. attach와 orientation을 감지하고 USB BMC PD physical layer를 통합해 최대 100W와 Type-C alternative interface를 지원합니다. 관리자는 Gene Chen입니다.

PD 세대, VBUS와 connector

19-52

`richtek,rt1711h`는 PD 2.0을, `richtek,rt1715`는 Fast Role Swap을 제외한 PD 3.0을 지원합니다. register와 interrupt는 각각 하나입니다. `vbus-supply`는 VBUS 전원이고 `wakeup-source`를 사용할 수 있습니다.

`connector` child는 공통 `/schemas/connector/usb-connector.yaml`을 따릅니다. 필수 속성은 `compatible`, `reg`, `connector`, `interrupts`이며 추가 속성은 허용하지 않습니다.

properties:
  compatible:
    enum:
      - richtek,rt1711h
      - richtek,rt1715
    description:
      RT1711H support PD20, RT1715 support PD30 except Fast Role Swap.

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  vbus-supply:
    description: VBUS power supply

  wakeup-source:
    type: boolean

  connector:
    type: object
    $ref: /schemas/connector/usb-connector.yaml#
    description:
      Properties for usb c connector.

additionalProperties: false

required:
  - compatible
  - reg
  - connector
  - interrupts

I2C와 dual-role PDO 예제

53-76

예제 I2C bus의 `rt1711h@4e`는 GPIO 3 level-low extended interrupt와 wakeup source를 사용합니다. USB-C connector는 data·power role 모두 `dual`, 선호 role은 `sink`이며 source와 sink 모두 5V 2A dual-role·data-swap PDO, operating sink power 10W를 설정합니다.

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/usb/pd.h>
    i2c {
      #address-cells = <1>;
      #size-cells = <0>;

      rt1711h@4e {
        compatible = "richtek,rt1711h";
        reg = <0x4e>;
        interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
        wakeup-source;

        connector {
          compatible = "usb-c-connector";
          label = "USB-C";
          data-role = "dual";
          power-role = "dual";
          try-power-role = "sink";
          source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
          sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
          op-sink-microwatt = <10000000>;

HS·SS·DisplayPort graph

77-103

connector graph의 `port@0`은 USB high-speed `usb_hs`, `port@1`은 SuperSpeed `usb_ss`, `port@2`는 DisplayPort AUX `dp_aux` endpoint에 각각 연결됩니다.

          ports {
            #address-cells = <1>;
            #size-cells = <0>;

            port@0 {
              reg = <0>;
              endpoint {
                remote-endpoint = <&usb_hs>;
              };
            };
            port@1 {
              reg = <1>;
              endpoint {
                remote-endpoint = <&usb_ss>;
              };
            };
            port@2 {
              reg = <2>;
              endpoint {
                remote-endpoint = <&dp_aux>;
              };
            };
          };
        };
      };
    };
...